How to remove and install a Windshield Wiper Motor on Ford Crown Victoria?

Disconnect the cable from the negative battery terminal, then remove the rear hood seal and the Windshield Wiper Motor housing cover by pulling off the rear hood seal weatherstripping and using a small screwdriver to detach each of the wiper housing clips. Next, remove the Windshield Wiper Motor retaining bolts, noting that on later models, the Windshield Wiper Motor linkage must be removed before accessing the motor mounting bolts. After that, remove the clip from the Windshield Wiper Motor and disconnect the wiper linkage drive arm from the motor by prying off the clip with a small screwdriver and detaching the Windshield Wiper Arm from the motor. Unplug the electrical connector and lift the Windshield Wiper Motor from the housing, with installation being the reverse of the removal process.

Genuine Ford Crown Victoria Windshield Wiper Motor

Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Windshield Wiper Motors found

View related parts
Ford Crown Victoria Wiper Motor Assembly
Part Number: 8W7Z-17508-A
Product Specifications
- Other Name: Motor Assy - Wiper; Wiper Motor
- Replaces: 3W7Z-17508-AA, 6W7Z-17508-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Wiper Motor Assembly
Part Number: 3W7Z-17508-AA
Product Specifications
- Other Name: Motor Assy - Wiper
- Manufacturer Note: "Smart" wiper motor w/integral wiper control module
- Replaced by: 8W7Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Wiper Motor Assembly
Part Number: F2VY-17V508-ARM
Product Specifications
- Other Name: Motor Assy - Wiper
- Manufacturer Note: Reman wiper motor, (may require FOVY-17V436-ARM output arm, 1W7Z-17V485-AARM bracket and F5AZ-17C518-AA windlatch assembly)
- Replaced by: F2VY-17V508-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Motor Assembly
Part Number: F7AZ-17V508-AARM
Product Specifications
- Other Name: Motor Assy - Wiper
- Manufacturer Note: Wiper motor, (may require FOVY-17V436-ARM output arm, 1W7Z-17V485-CARM bracket and F5AZ-17C518-AA windlatch assembly)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1999 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E
View related parts
Ford Crown Victoria Wiper Motor Assembly
Part Number: 6W7Z-17508-AC
Product Specifications
- Other Name: Motor Assy - Wiper
- Manufacturer Note: Motor Only
- Replaced by: 8W7Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Crown Victoria Windshield Wiper Motor

We provide a wide range of Ford Crown Victoria Windshield Wiper Motor at the optimal prices. If you need Ford Crown Victoria Windshield Wiper Motor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Crown Victoria Windshield Wiper Motor Parts Questions & Experts Answers

Wiper Motor Assembly
F7AZ-17V508-AARM
Q:
How to remove and install a Windshield Wiper Motor on Ford Crown Victoria?
Posted by Vantage B.
A:
Disconnect the cable from the negative battery terminal, then remove the rear hood seal and the Windshield Wiper Motor housing cover by pulling off the rear hood seal weatherstripping and using a small screwdriver to detach each of the wiper housing clips. Next, remove the Windshield Wiper Motor retaining bolts, noting that on later models, the Windshield Wiper Motor linkage must be removed before accessing the motor mounting bolts. After that, remove the clip from the Windshield Wiper Motor and disconnect the wiper linkage drive arm from the motor by prying off the clip with a small screwdriver and detaching the Windshield Wiper Arm from the motor. Unplug the electrical connector and lift the Windshield Wiper Motor from the housing, with installation being the reverse of the removal process.
Answered by Ford Parts Specialist Ley / Mar 05, 2022