My Garage
My Account
Cart
Genuine Ford Crown Victoria PCV Hose
PCV Valve Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 PCV Hoses found
Ford Crown Victoria Vent Hose
Part Number: 5W7Z-6A664-AA$17.91 MSRP: $26.77You Save: $8.86 (34%)Ships in 1-2 Business Days
Ford Crown Victoria Tube Assembly
Part Number: 5W7Z-6758-BA$42.24 MSRP: $60.68You Save: $18.44 (31%)
Ford Crown Victoria Ventilation Tube
Part Number: 4L2Z-6762-AA$6.08 MSRP: $8.67You Save: $2.59 (30%)Ships in 1-2 Business Days
Ford Crown Victoria Tube Assembly
Part Number: 3W7Z-6758-AA$26.09 MSRP: $37.17You Save: $11.08 (30%)
Ford Crown Victoria PCV Hose
Ford Crown Victoria PCV Hose channels oily crankcase vapors into the intake so they burn cleanly and keep fuel use steady. The PCV Hose sits between the crankcase port and the spring loaded PCV valve in the Ford engine bay, letting the pintle inside that valve open or shut as pressure changes while tough rubber walls steer gases toward combustion. Throughout the production run of the Crown Victoria, only two layout tweaks appeared, some early cars mount the PCV Hose on the driver side while later Crown Victoria versions route a slightly longer piece along the passenger side, yet both PCV Hose styles share the same purpose and direct fit bends. There are no complex variants, just side specific hoses that snap into factory clamps, and selecting the right one makes installation quick. A split PCV Hose invites unmetered air, messes with the air fuel blend, raises emissions, and can even hurt the valve, so Ford owners should inspect it often and swapping the hose on any Ford Crown Victoria restores smooth driving.
We provide a wide range of Ford Crown Victoria PCV Hose at the optimal prices. If you need Ford Crown Victoria PCV Hose, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Ford Crown Victoria PCV Hose Parts Questions & Experts Answers
- Q: What are the essential inspections for pcv hose,rubber and plastic hoses in the engine, accessory, and emission systems on Ford Crown Victoria?A:To prevent damage from high temperatures, all rubber and plastic hoses in the engine, accessory, and emission systems should be regularly inspected. When doing inspections, it is important to check for cracks, loose clamps, material hardening as well as leaks. Clamps must be tight enough not to leak anything. Hoses without clamps need an examination because they can expand or harden causing a leak. PCV system hose should be checked for such things like cracks, leaks, obstructions then cleaned if there is any blockage. Vacuum hoses should be labeled before removing them. A vacuum hose is going to help you determine where the air is leaking from. Deterioration chaffing and cracking are defects of flexible fuel lines that have to be detected. Fuel hoses designed for your system should be used here. Spring-type clamps require replacements with screw clamps instead. The bends at metal fuel lines contain creases or fractures which normally lead to their breaking off hence use seamless steel tubing for replacements where possible.
