How to remove and install the A/C Switch control head in a Ford Bronco II?

To remove the A/C Switch, disconnect the negative battery cable. Remove the ashtray and drawer slide bracket. Pull the finish panel away from the instrument panel. Disconnect the wire from the 4x4 transfer switch. Remove the four screws attaching the control assembly. Pull the control through the instrument panel opening. Remove the vacuum harness from the vacuum switch. Release the temperature and function cable snap-in flags. Remove the temperature and function cables. Remove the control assembly. To install the A/C Switch, pull the control cables through the instrument panel opening. Attach the function and temperature cables to the control assembly. Connect the wiring harness and vacuum hose. Secure the control assembly with mounting screws. Reconnect the 4x4 electric shift harness. Install the cluster finish panel. Reinstall the ashtray and drawer slide bracket. Reconnect the battery cable and test the control assembly.

Genuine Ford Bronco II A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Switches found

View related parts
Ford Bronco II Switch Assembly
Part Number: E9TZ-19986-B
$21.34 MSRP: $29.16
You Save: $7.82 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1990 Ford Bronco II | 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco II Switch Assembly
Part Number: E9TZ-19986-A
$87.84 MSRP: $122.02
You Save: $34.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy; Blower Motor Switch
- Replaces: E9TZ-19A724-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1990 Ford Bronco II | 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco II Switch Assembly
Part Number: E53Z-19986-A
Product Specifications
- Other Name: Switch Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1988 Ford Bronco II | 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 4AT A4LD, 4MT, 5MT
View related parts
Ford Bronco II Switch Assembly
Part Number: F3TZ-18578-B
Product Specifications
- Other Name: Switch Assy; Blower Motor Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1990 Ford Bronco II | 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco II Switch Assembly - Vacuum
Part Number: E9TZ-19A523-A
Product Specifications
- Other Name: Switch Assy - Vacuum; Dash Control Unit
- Manufacturer Note: w/integral A/C & htr.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1990 Ford Bronco II | 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT

Ford Bronco II A/C Switch

The A/C Switch of the Ford Bronco II allows the occupants to turn the air conditioning circuit on or off and choose the desired airflow. The A/C Switch is located in the climate control cluster of the Ford Bronco II dashboard. It works together with relays and other controls to send on-off commands to the system's cooling and heating. By pressing the A/C Switch, an electrical signal reaches the climate control module, which then regulates blower speed and compressor activity in response. A properly functioning A/C Switch can ensure efficient use of fuel by preventing the A/C system from operating needlessly. Conversely, a faulty A/C Switch leaves the circuit permanently engaged or entirely inactive. The part is intended for easy fingertip access and use with a button or knob surface, providing the driver with immediate control over interior conditions. The Ford Bronco II has no alternative styles, so this single A/C Switch description applies to any Ford Bronco II installation.

We provide a wide range of Ford Bronco II A/C Switch at the optimal prices. If you need Ford Bronco II A/C Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Bronco II A/C Switch Parts Questions & Experts Answers

Switch Assembly
E53Z-19986-A
Q: How to remove and install the A/C Switch control head in a Ford Bronco II?
A:
To remove the A/C Switch, disconnect the negative Battery Cable. Remove the ashtray and drawer slide bracket. Pull the finish panel away from the instrument panel. Disconnect the wire from the 4x4 transfer switch. Remove the four screws attaching the control assembly. Pull the control through the instrument panel opening. Remove the vacuum harness from the vacuum switch. Release the temperature and function cable snap-in flags. Remove the temperature and function cables. Remove the control assembly. To install the A/C Switch, pull the control cables through the instrument panel opening. Attach the function and temperature cables to the control assembly. Connect the wiring harness and vacuum hose. Secure the control assembly with mounting screws. Reconnect the 4x4 electric shift harness. Install the cluster finish panel. Reinstall the ashtray and drawer slide bracket. Reconnect the battery cable and test the control assembly.