How to replace Washer Pump,Washer Reservoir,Wiper Motor and Wiper Switch on Ford Bronco?

The windshield wiper/washer system on vehicles includes a motor with dual speed capabilities and optional interval operations, linkages that convert rotary motion to oscillating movement at the blades, and the wiper blades themselves. The washer system is managed by a plastic reservoir with a pump that distributes washing fluid to nozzles on each side of the windshield, with early models controlled by a single dash-mounted switch and later models by a multi-function switch. To replace the wiper arm, raise the blade end off the windshield, move the slide latch away from the pivot shaft, and pull the arm off without tools. Reinstall by holding the arm head on the pivot shaft and ensuring the motor is in the parked position. For motor removal, disconnect the negative battery cable, remove the wiper arm and blade assemblies, lift the cowl grille, disconnect the washer nozzle hose, and remove the linkage and motor wiring connector before taking out the motor. The pivot shaft and linkage can be serviced separately after removing the pivot body-to-cowl screws. For early models, the wiper control switch can be accessed by removing the switch knob and bezel, while later models use a multifunction switch. The wiper control module, if equipped, is located behind the glove box and can be removed after disconnecting the battery. The washer reservoir and pump are found on the left inner fenderwell; to replace them, remove retaining screws and the wiring connector, then pry out the retaining ring and pull the pump from the reservoir, ensuring proper reassembly with lubrication and alignment during installation.

Genuine Ford Bronco Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Switches found

View related parts
Ford Bronco Switch Assembly
Part Number: E7TZ-17A553-B
$18.76 MSRP: $25.64
You Save: $6.88 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy; Wiper Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1991 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco HOUSING ASY - STEERING COLUMN
Part Number: M2DZ-3F791-CB
$76.38 MSRP: $111.67
You Save: $35.29 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly
- Replaces: M2DZ-3F791-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco HOUSING ASY - STEERING COLUMN
Part Number: M2DZ-3F791-AC
$270.07 MSRP: $398.33
You Save: $128.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly
- Replaces: M2DZ-3F791-AA, M2DZ-3F791-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco HOUSING ASY - STEERING COLUMN
Part Number: M2DZ-3F791-DB
$66.69 MSRP: $97.50
You Save: $30.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly
- Replaces: M2DZ-3F791-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco HOUSING ASY - STEERING COLUMN
Part Number: M2DZ-3F791-BC
$257.64 MSRP: $380.00
You Save: $122.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly
- Replaces: M2DZ-3F791-BB, M2DZ-3F791-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Switch Assembly
Part Number: E7TZ-17A553-A
Product Specifications
- Other Name: Switch Assy; Wiper Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1991 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT

Ford Bronco Wiper Switch

The Windshield Wiper Switch is a control thatis installed in the Ford Bronco vehicles with the main job of controlling the activity of the windshield wipers. Because the windscreen has to be clean for drivers to have a good view of the road this device is essential for effective cleaning of windshields. Throughout the years there have been many styles of the Ford Bronco Windshield Wiper Switch that has been used to help improve user control and functionality. Although the various types are not described in detail, development of the Ford Bronco's body could be attributed to improvements in technology and, particularly, human-Computer Interface, in order to achieve the premier performance of the Windshield Wiper Switch. In general, we can still consider the Ford Bronco Windshield Wiper Switch as one of the key factors for driving safely in conditions of adverse weather conditions.

We provide a wide range of Ford Bronco Wiper Switch at the best prices possible. If you need Ford Bronco Wiper Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco Wiper Switch Parts Questions & Experts Answers

Switch Assembly
E7TZ-17A553-B
Q: How to replace Washer Pump,Washer Reservoir,Wiper Motor and Wiper Switch on Ford Bronco?
A: The windshield wiper/washer system on vehicles includes a motor with dual speed capabilities and optional interval operations, linkages that convert rotary motion to oscillating movement at the blades, and the wiper blades themselves. The washer system is managed by a plastic reservoir with a pump that distributes washing fluid to nozzles on each side of the windshield, with early models controlled by a single dash-mounted switch and later models by a multi-function switch. To replace the wiper arm, raise the blade end off the windshield, move the slide latch away from the pivot shaft, and pull the arm off without tools. Reinstall by holding the arm head on the pivot shaft and ensuring the motor is in the parked position. For motor removal, disconnect the negative battery cable, remove the wiper arm and blade assemblies, lift the cowl grille, disconnect the washer nozzle hose, and remove the linkage and motor wiring connector before taking out the motor. The pivot shaft and linkage can be serviced separately after removing the pivot body-to-cowl screws. For early models, the wiper control switch can be accessed by removing the switch knob and bezel, while later models use a multifunction switch. The wiper control module, if equipped, is located behind the glove box and can be removed after disconnecting the battery. The washer reservoir and pump are found on the left inner fenderwell; to replace them, remove retaining screws and the wiring connector, then pry out the retaining ring and pull the pump from the reservoir, ensuring proper reassembly with lubrication and alignment during installation.