How to replace the turn signal switch and the multi-function switch on the Ford Bronco?

As a replacement for the turn signal or hazard switch on early models, you have to remove the negative cable from the battery. Secondly, take off the hand brake lever and the accelerator; on this be careful not to touch the air bag system. Remove the Turn Signal Switch by retracting the turn signal switch lever, and by unscrewing it from the Turn Signal Switch. Then pull out the Turn Signal Switch shroud, as well as the instrument panel opening cover. Pulling off the Turn Signal Switch harness connector on the bottom part of the Turn Signal Switch and using a few more twists of a wire terminal removal tool to remove each of wires in turn from the connector which is to be retrieved for reinstallation with precise consideration of color code and its position. Twist the free wire ends and cover them by tape and also insert a pull through wire then remove the cover of the switch as well as the wire harness. For the new switch, fix the wires at the pull wire and while guiding put the harness through. Place the wire terminals into the correct positions in the connector then insert the wires into their respective position and push down firmly on the connector until it clicks to assume or lock in position. Reverse process for installation and ensure that all turn signal and warning flasher functions are working properly. For later models, the starting point is to unlock and pull off the Turn Signal Switch shrouds, then unscrew and pull out the multi-function switch while the installation process is done the other way around.

Genuine Ford Bronco Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Turn Signal Switches found

View related parts
Ford Bronco SWITCH ASY - DIRECTION INDICAT
Part Number: M2DZ-13K359-AA
$67.91 MSRP: $105.00
You Save: $37.09 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Multifunction Switch, Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2024 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco SWITCH ASY - DIRECTION INDICAT
Part Number: R2DZ-13K359-AA
$62.59 MSRP: $93.27
You Save: $30.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch
- Replaces: LB5Z-13K359-AA, SW-8470
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2025 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Steering Column Housing Assembly
Part Number: M2DZ-3F791-CB
$292.67 MSRP: $431.67
You Save: $139.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Assembly
- Replaced by: R2DZ-3F791-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Steering Column Housing Assembly
Part Number: M2DZ-3F791-DB
$276.85 MSRP: $408.33
You Save: $131.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Assembly
- Replaced by: R2DZ-3F791-DA
- Replaces: M2DZ-3F791-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Steering Column Housing Assembly
Part Number: M2DZ-3F791-AC
$277.98 MSRP: $410.00
You Save: $132.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Assembly
- Replaces: M2DZ-3F791-AA, M2DZ-3F791-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Steering Column Housing Assembly
Part Number: M2DZ-3F791-BC
$264.42 MSRP: $390.00
You Save: $125.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING ASY - STEERING COLUMN; Switch Assembly
- Replaces: M2DZ-3F791-BA, M2DZ-3F791-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco SWITCH ASY - DIRECTION INDICAT
Part Number: R2DZ-13K359-BA
$115.90 MSRP: $172.73
You Save: $56.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Direction Indicator Switch Assembly
Part Number: F8TZ-13K359-AB
Product Specifications
- Other Name: Switch Assy - Direction Indicator; Signal Switch, Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Switch - Dir. Indic/Warning Flasher
Part Number: E7TZ-13341-B
Product Specifications
- Other Name: Signal Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1991 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Switch - Dir. Indic/Warning Flasher
Part Number: E7TZ-13341-A
Product Specifications
- Other Name: Signal Switch, Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1991 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Switch - Dir. Indic/Warning Flasher
Part Number: E5TZ-13341-B
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1986 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT
View related parts
Ford Bronco Switch - Dir. Indic/Warning Flasher
Part Number: E5TZ-13341-E
Product Specifications
- Other Name: Turn Signal & Hazard Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1986 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT

Ford Bronco Turn Signal Switch

The Ford Bronco Turn Signal Switch is a column mounted lever. The driver can flick this lever to indicate their turning intentions, improving safety. This Turn Signal Switch is located within the steering column and tilts up and down. This action closes internal contacts and sends current to either the left or right indicator lamps. This switch cancels automatically when the wheel straightens thanks to a spring loaded cam. The early Ford Bronco trucks applied a simple Turn Signal Switch that only controlled blinkers and high beam flash. Later Ford sport utility generations adopted a combined Turn Signal Switch that also activates windshield wipers, headlights, and cruise control, cutting down the number of stalks. The newer style has extra wiring and a bigger connector, while the older style has a simpler plug and fewer circuits, making them non interchangeable. No matter what version you have, today's Ford Bronco drivers know that being responsive with the Turn Signal Switch is very important. If the unit fails, the flashers will not work, and the other motorists will be guessing your next move during day or night driving.

We provide a wide range of Ford Bronco Turn Signal Switch at the optimal prices. If you need Ford Bronco Turn Signal Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Ford Bronco Turn Signal Switch Parts Questions & Experts Answers

Switch - Dir. Indic/Warning Flasher
E7TZ-13341-A
Q: How to replace the turn signal switch and the multi-function switch on the Ford Bronco?
A:
As a replacement for the turn signal or hazard switch on early models, you have to remove the negative cable from the battery. Secondly, take off the hand brake lever and the accelerator; on this be careful not to touch the air bag system. Remove the Turn Signal Switch by retracting the turn signal switch lever, and by unscrewing it from the Turn Signal Switch. Then pull out the Turn Signal Switch shroud, as well as the instrument panel opening cover. Pulling off the Turn Signal Switch harness connector on the bottom part of the Turn Signal Switch and using a few more twists of a wire terminal removal tool to remove each of wires in turn from the connector which is to be retrieved for reinstallation with precise consideration of color code and its position. Twist the free wire ends and cover them by tape and also insert a pull through wire then remove the cover of the switch as well as the wire harness. For the new switch, fix the wires at the pull wire and while guiding put the harness through. Place the wire terminals into the correct positions in the connector then insert the wires into their respective position and push down firmly on the connector until it clicks to assume or lock in position. Reverse process for installation and ensure that all turn signal and warning flasher functions are working properly. For later models, the starting point is to unlock and pull off the Turn Signal Switch shrouds, then unscrew and pull out the multi-function switch while the installation process is done the other way around.