How should you properly remove and install an exhaust manifold in 2.0L SPI engine on 2007 Ford Focus?

Because of the heating and cooling cycles, exhaust components, particularly exhaust manifolds, often have fasteners that become frozen and difficult to remove. To facilitate removal, apply penetrating oil to the threads and allow it to soak in, tapping lightly on the fastener head to help the oil penetrate. When installing the exhaust manifold, use anti-seize compound on the fasteners for easier removal in the future. Begin by disconnecting the negative cable from the battery and the electrical connector from the heated oxygen sensor. Remove the nuts securing the exhaust manifold heat shield, applying penetrating oil to the studs beforehand. Next, remove the cooling fan and shroud, then disconnect the catalytic converter intake pipe from the exhaust manifold and remove the nuts and studs securing the EGR tube. Take off the exhaust manifold attaching nuts and slip the manifold off the studs, removing the gasket as well. Clean all traces of the old gasket and carbon from the manifold and its mounting surface on the cylinder head, taking care not to scratch or gouge the aluminum surface. Position a new gasket on the studs, install the manifold, and tighten its mounting nuts evenly to the specified torque. Finally, reinstall the heat shield and tighten its nuts to the specified torque, completing the installation in reverse order of removal.

Genuine 2007 Ford Focus Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2007 Ford Focus Exhaust Manifold And Catalyst
Part Number: 7S4Z-5G232-E
$2764.61 MSRP: $3557.71
You Save: $793.10 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Replaces: 7S4Z-5G232-EA
- Base No.: 5G232
- Item Weight: 18.40 Pounds
- Item Dimensions: 24.5 x 18.8 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-5G232-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
2007 Ford Focus Exhaust Manifold And Catalyst
Part Number: 7S4Z-5G232-F
$3268.31 MSRP: $4207.14
You Save: $938.83 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst Assembly
- Base No.: 5G232
- Item Weight: 19.50 Pounds
- Item Dimensions: 25.9 x 20.9 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-5G232-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
2007 Ford Focus Exhaust Manifold Assembly
Part Number: 7S4Z-5G232-EA
$2764.61 MSRP: $3557.71
You Save: $793.10 (23%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Replaced by: 7S4Z-5G232-E
- Base No.: 5G232
- Item Weight: 20.00 Pounds
- Item Dimensions: 23.8 x 18.9 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-5G232-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
2007 Ford Focus Exhaust Manifold Assembly
Part Number: 7S4Z-5G232-DA
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Replaces: 6S4Z-5G232-DE
- Base No.: 5G232
- Item Weight: 19.90 Pounds
- Item Dimensions: 24.0 x 18.2 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.0L Duratec HE | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
2007 Ford Focus Exhaust Manifold Assembly
Part Number: 7S4Z-5G232-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Manifold
- Replaces: 5S4Z-5G232-EA
- Base No.: 5G232
- Item Weight: 19.00 Pounds
- Item Dimensions: 24.7 x 18.9 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-5G232-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.3L | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
2007 Ford Focus Exhaust Manifold Assembly
Part Number: 5S4Z-5G232-EA
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Replaced by: 7S4Z-5G232-A
- Item Weight: 19.90 Pounds
- Item Dimensions: 25.0 x 18.4 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-5G232-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- 4 Cyl 2.3L | 4-Speed Automatic Transaxle - 4F27E, 5-Speed Manual Transmission - MTX75, Front-Wheel Drive (Left Hand Drive), Left Hand Drive

2007 Ford Focus Exhaust Manifold

At FordPartsGiant.com, you will find an extensive inventory of genuine 2007 Ford Focus Exhaust Manifold offered at competitive prices online. These manufacturer-backed OEM 2007 Ford Focus Exhaust Manifold ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

2007 Ford Focus Exhaust Manifold Parts Questions & Experts Answers

Q:
How should you properly remove and install an exhaust manifold in 2.0L SPI engine on 2007 Ford Focus?
Posted by Himanshu G.
A:
Because of the heating and cooling cycles, exhaust components, particularly exhaust manifolds, often have fasteners that become frozen and difficult to remove. To facilitate removal, apply penetrating oil to the threads and allow it to soak in, tapping lightly on the fastener head to help the oil penetrate. When installing the exhaust manifold, use anti-seize compound on the fasteners for easier removal in the future. Begin by disconnecting the negative cable from the battery and the electrical connector from the heated oxygen sensor. Remove the nuts securing the exhaust manifold heat shield, applying penetrating oil to the studs beforehand. Next, remove the cooling fan and shroud, then disconnect the catalytic converter intake pipe from the exhaust manifold and remove the nuts and studs securing the EGR tube. Take off the exhaust manifold attaching nuts and slip the manifold off the studs, removing the gasket as well. Clean all traces of the old gasket and carbon from the manifold and its mounting surface on the cylinder head, taking care not to scratch or gouge the aluminum surface. Position a new gasket on the studs, install the manifold, and tighten its mounting nuts evenly to the specified torque. Finally, reinstall the heat shield and tighten its nuts to the specified torque, completing the installation in reverse order of removal.
Answered by Ford Parts Specialist Jack / Aug 31, 2023