There are two different types of fuel tanks on these models, The two broad categories of products that it is involved in the production of are steel and plastic. Fuel tanks might be steam cleaned to rid from sediment or rust from the base of the tank; nevertheless the fuel tank sending unit, the fuel pump and the vapor valve should be removed prior to the cleaning process, and enough time should be allowed for the fuel tank to air dry before it is taken back to use. Repair to at least the steel fuel tank or filler pipe must therefore be done by a professional since it is very critical and dangerous as the finest of fumes may stay even after a cleaning and flushing exercise. The fuel tank is made of plastic and cannot be repaired; the leakages or any form of damages require the tank be replaced. In particular, if the fuel tank is removed from the car, it must be placed in a location free from sources of ignition of gasoline vapors, including in car service centers with gasoline-type equipment and appliances that could result in explosion. Whenever the fuel tank is steam cleaned or serviced, the vapor valve assembly with all grommets and seals must be replaced for the possibilities of leakage.