Genuine 1998 Lincoln Town Car Headlamp

1998 Lincoln Town Car Headlamp Parts Questions & Experts Answers

• Q:

  How to remove and install a sealed beam or composite bulb-type Headlamp on 1998 Lincoln Town Car?

  Posted by Anders P.

  A:

  Disconnect cable from negative battery terminal. Remove retaining screws and detach Headlamp bezel. Carefully remove Headlamp retainer screws, avoiding adjusting screws. Use Phillips head screwdriver. Remove retainer and pull Headlamp out enough to disconnect electrical connector. Remove Headlamp and connector. To install, connect electrical connector, place Headlamp in position, and install retainer and screws. Place bezel and install retaining screws.Composite bulb-type: Warning: Halogen bulbs are under pressure and may shatter if scratched or dropped. Wear eye protection and handle bulbs carefully, grasping only the base. Avoid touching bulb surface with fingers to prevent overheating. Clean surface with rubbing alcohol if touched. Open hood. Twist plastic retainers and remove sight shield for access to Headlamp housings. Disconnect cable from negative battery terminal. Remove cover and reach behind Headlamp assembly. Turn bulb holder counterclockwise to remove. Lift holder assembly for bulb access. On newer models, remove Headlamp housing for bulb holder access. Release clip and disconnect bulb holder from connector. Insert new bulb into connector until it snaps into place. Install bulb holder in Headlamp assembly.

  Answered by Ford Parts Specialist Don / Nov 17, 2025