How to remove and install the Neutral Safety Switch in the Manual transmission on a 1987 Ford Bronco II?

Every car with a manual transmission contains a neutral sensing switch that sends information about the car's status to the neural computer situated in the vehicle; this computer will start the vehicle only in the N position, and to disconnect the switch, you have to first, unlite the car battery and then lift the car. Put the transmission in any gear other than N, wipe the vicinity of the switch and then take it out. For Installation: Fix the switch and torque it in the range of 8-12 Ft. lbs. (11-16Nm), reconnect the harness connector to the switch, lower the vehicle, reconnects the negative terrestrial battery cable.

Genuine 1987 Ford Bronco II Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Neutral Safety Switches found

View related parts
1987 Ford Bronco II Switch - Neutral Sensing
Part Number: E6TZ-7A247-A
$37.36 MSRP: $51.04
You Save: $13.68 (27%)
ADD TO CART
Product Specifications
- Other Name: Neutral Safety Switch
- Base No.: 7A247
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 0.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E6TZ-7A247-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 1987 Ford Bronco II Submodels:
- 4 Cyl 2.3L, 6 Cyl 2.9L | 4AT A4LD, 4AT AOD, 4MT, 5MT
View related parts
1987 Ford Bronco II Switch Assy - Starter Inhibitor
Part Number: D6RY-7A247-B
Product Specifications
- Base No.: 7A247
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: D6RY-7A247-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 1987 Ford Bronco II Submodels:
- 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L | 3AT C5, 4AT A4LD, 4AT AOD, 4MT, 5MT

1987 Ford Bronco II Neutral Safety Switch

At FordPartsGiant.com, you will find an extensive inventory of genuine 1987 Ford Bronco II Neutral Safety Switch offered at competitive prices online. These manufacturer-backed OEM 1987 Ford Bronco II Neutral Safety Switch ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

1987 Ford Bronco II Neutral Safety Switch Parts Questions & Experts Answers

Q: How to remove and install the Neutral Safety Switch in the Manual transmission on a 1987 Ford Bronco II?
A: Every car with a manual transmission contains a neutral sensing switch that sends information about the car's status to the neural computer situated in the vehicle; this computer will start the vehicle only in the N position, and to disconnect the switch, you have to first, unlite the car battery and then lift the car. Put the transmission in any gear other than N, wipe the vicinity of the switch and then take it out. For Installation: Fix the switch and torque it in the range of 8-12 Ft. lbs. (11-16Nm), reconnect the harness connector to the switch, lower the vehicle, reconnects the negative terrestrial battery cable.