Mercury 1W1Z-2200-BA Brake Shoe And Lining Kit

After tightening the caliper bolts securely, depress the brake pedal to bring the pads into contact with the disc. Then, check the brake fluid level and top it off if needed.

Remove the master cylinder cap, check the fluid level, and remove about half of the fluid. Then, remove the inner shoe hold-down clips, outer brake pad retaining clips, caliper locating pins, and upper stabilizer. Lift the caliper assembly from the anchor plate, remove the outer pad, and depress the piston into the caliper with a C-clamp.

After removing the old brake pads, replace them with new inner and outer brake pads, ensuring they are fully seated.