Make sure this part fits

Mercury F89Z-9155-A Fuel Filter Assembly

1998-2007 Mercury F89Z9155A

Customer Questions & Expert Answers (11)
F89Z-9155-A Ford Fuel Filter Assembly Product Photo 1 of 5
  • Part Description
    Filter Assy - Fuel
  • Base No.
    9155
  • Replaced By
    2M5Z-9155-CA
  • Manufacturer
    Ford
Make sure this part fits
$20.74 MSRP: $32.36
You Save: $11.62 (36%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mercury
    Base No.9155
    Manufacturer Part NumberF89Z-9155-A, F89Z9155A
    Part DescriptionFilter Assy - Fuel
    Item Dimensions7.9 x 3.4 x 3.4 inches
    Item Weight0.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF89Z-9155-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998-2006 Mercury Grand Marquis8 Cyl 4.6L4AT 4R70W
    2005-2007 Mercury Montego6 Cyl 3.0L DOHC EFI Modular6-Speed Automatic Transaxle - AWF21, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2004-2005 Mercury Monterey6 Cyl 3.9L OHV EFI NA, 6 Cyl 4.2L OHV EFI4AT AX4N, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    1999-2001 Mercury Mountaineer6 Cyl 4.0L, 8 Cyl 5.0L4AT 4R70W, 5AT 5R55E
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F89Z-9155-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How is the fuel filter mounted on the Ford F-150? Posted by Customer
    A:
    The fuel filter is mounted under the vehicle on the left side, in front of the gas tank. Relieve the fuel system pressure, then disconnect the cable from the negative terminal of the battery. If necessary, raise the vehicle and support it securely on jackstands. Inspect the fittings at both ends of the filter to see if they're clean. If more than a light coating of dust is present, clean the fittings before proceeding. Release the clips holding the fuel lines to the filter. Detach the fuel hoses, one at a time, from the filter. Be prepared for fuel spillage. After the lines are detached, check the fittings for damage and distortion. If they were damaged in any way during removal, new ones must be used when the lines are reattached to the new filter. If new clips are packaged with the filter, be sure to use them in place of the originals. Remove the fuel filter from the mounting bracket, while noting the direction the fuel filter is installed. Install the new filter in the same direction. Carefully push each hose onto the filter until it's seated against the collar on the fitting, then install the clips. Make sure the clips are securely attached to the hose fittings - if they come off, the hoses could back off the filter and a fire could result! Start the engine and check for fuel leaks.
    Posted by FordPartsGiant Specialist
    Q:
    How is the fuel system pressure relieved before removing the fuel filter for the 2003 Ford Crown Victoria? Posted by Customer
    A:
    Relieve the fuel system pressure. Removal of the hairpin clip from each fitting is a two-stage procedure. First, spread the two clip legs apart about 1/8-inch to disengage them, then push in on them. Pull on the other end of the clip to detach it from the fitting.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    What should be done if there is a plastic protective cover over the fuel filter for the 2006 Ford Expedition? Posted by Customer
    A:
    Twist the fasteners one-quarter turn counterclockwise to remove the cover.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    How should the 1999 Ford Explorer be positioned to prevent fuel siphoning? Posted by Customer
    A:
    Position the front end of the vehicle higher than the rear to prevent fuel siphoning.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    Why is it important to ensure the new filter is specifically designed for your engine for the 2001 Ford Explorer Sport Trac? Posted by Customer
    A:
    Fuel injection system filters are built to withstand high pressure and often cost more than filters meant for use in carbureted systems. Filters meant for carbureted systems may burst due to the high pressure.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    What should you be prepared for when removing the fuel hoses for the 2001 Ford Focus? Posted by Customer
    A:
    You should be prepared for fuel spillage.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    Where is the fuel filter mounted for the 1998 Ford Ranger? Posted by Customer
    A:
    The fuel filter is mounted within the left frame rail.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    What is the process for detaching the fuel hoses from the filter, and what precaution should be taken during this step for the 2002 Mercury Grand Marquis? Posted by Customer
    A:
    Once both hairpin clips are released, grasp the fuel hoses, one at a time, and pull them straight off the filter. Be prepared for fuel spillage.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    What tool is required for this procedure for the 2005 Lincoln Navigator? Posted by Customer
    A:
    A special fuel line disconnect tool.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    Q:
    Where is the fuel filter located on the 2000 Lincoln Town Car? Posted by Customer
    A:
    The fuel filter is located at the carburetor.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Fuel Filter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F89Z-9155-A, the Right Choice

To ensure reliability, purchase part # F89Z-9155-A Fuel Filter Assembly. It is also called Fuel Filter. OEM parts are of high quality and known for their longevity. This is because they are built to the Ford standards which are relatively high and undergo rigorous quality control testing. This part fits specific Mercury Grand Marquis, Montego, Mountaineer models.

FordPartsGiant.com is a leading supplier of genuine components and accessories such as F89Z9155A Fuel Filter Assembly. Looking to purchase quality low-cost OEM Ford parts? You have just found the right place. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly