Lincoln F75Z-17508-AA Wiper Motor Assembly

Installation is the reverse of removal.

First, check the fuse. If the fuse is OK, connect a jumper wire between the wiper motor and ground, then retest. If the motor works now, repair the ground connection. If it still doesn't work, turn the wiper switch to the HI position and check for voltage at the motor. If there's voltage, remove the motor and check it off the vehicle with fused jumper wires from the battery. If it works, check for binding linkage. If it still doesn't work, replace it. If there's no voltage at the motor, check for voltage at the wiper control module. If there's voltage at the module and none at the motor, check the switch for continuity. If the switch is OK, the wiper control module is likely bad.