Lincoln 8L1Z-2A635-A Parking Brake Cable Assembly

To relieve tension on the front parking brake cable, have an assistant pull down on the cable under the dash while inserting a drill bit into the parking brake pedal assembly's hole. Do not remove the pin until the new cable is installed.

Remove the retaining screw from the parking brake release handle assembly and route the release handle through the dash opening. Unplug the electrical connector for the parking brake switch at the top of the parking brake pedal assembly, remove the three retaining nuts, and take out the parking brake pedal assembly. Disengage the plug on the front parking brake cable from the parking brake pedal and slide the cable through the pedal bracket. Pry the rubber seal from the front floorpan, and under the vehicle, squeeze the cable ferrule at the bracket forward of the equalizer to remove the front parking brake cable.