Ford DR3Z-18124-D Shock Absorber Assembly

Remove the ABS harness and sensor, if equipped, as well as the brake line bracket and stabilizer bar link.

If you suspect worn or weak shock absorbers, repeat the check at each of the three remaining corners of the vehicle. Additionally, raise the vehicle and support it securely on jackstands to inspect the shock absorbers for evidence of fluid leakage. Some light film of fluid is generally not a cause for concern, but if significant leakage is noticed, it's advisable to replace the shocks as a set. Ensure that the leakage is from the shocks and not another source. Check the shocks to make sure they are securely mounted and undamaged. Also, inspect the upper mounts for damage and wear.

Yes, complete strut assemblies may be available on an exchange basis. This option can save time and effort as the entire assembly can be replaced instead of disassembling and reassembling individual components.

To raise the vehicle, place it on the ground and at normal ride height, then mark the shock absorbers in relation to the dust sleeve. Next, raise the rear of the vehicle and support it securely on jackstands placed under the frame, avoiding support under the differential housing or axle.