Make sure this part fits

Ford AL5Z-18125-AG Shock Absorber Assembly

2010-2011 Ford Ranger AL5Z18125AG

Customer Questions & Expert Answers (3)
AL5Z-18125-AG Ford Shock Absorber Assembly Illustration 1 of 1
  • Part Description
    Shock Absorber Assy
  • Base No.
    18125
  • Replaces
    ASH-1250, AL5Z-18125-AB, ASH-1249, AL5Z-18125-A
  • Manufacturer
    Ford
Make sure this part fits
$70.18 MSRP: $118.36
You Save: $48.18 (41%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Ford
    Base No.18125
    Manufacturer Part NumberAL5Z-18125-AG, AL5Z18125AG
    Part DescriptionShock Absorber Assy
    Other NamesShock, Shock Absorber
    Item Dimensions26.5 x 3.5 x 3.3 inches
    Item Weight4.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesASH-1250, AL5Z-18125-AB, ASH-1249, AL5Z-18125-A
    Require Quantity2
    ManufacturerFord
    SKUAL5Z-18125-AG
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2011 Ford Ranger4 Cyl 2.3L NA Petrol, 6 Cyl 4.0L SOHC EFI5-Speed Automatic Transmission - 5R44E/5R55E, 5-Speed Manual Transmission - R1HD, 5-Speed Manual Transmission M5R1, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Will these fit my car and if not which part will? Thank you. Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if AL5Z-18125-AG fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How can you check the steering and suspension components for the 2011 Ford Ranger? Posted by Customer
    A:
    Visually inspect the steering system components for damage and distortion. Look for leaks and damaged seals, boots, and fittings. Clean the lower end of the steering knuckle. Have an assistant grasp the lower edge of the tire and move the wheel in and out while you look for movement at the steering knuckle-to-axle arm ball joints. If there is any movement, the ball joint(s) must be replaced. Grasp each front tire at the front and rear edges, push in at the front, pull out at the rear, and feel for play in the steering linkage. If any free play is noted, check the steering gear mounts and the tie-rod ball joints for looseness. If the steering gear mounts are loose, tighten them. If the tie-rods are loose, the ball joints may be worn.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step after removing the shock absorber for the 2010 Ford Ranger? Posted by Customer
    A:
    The installation is the reverse of removal. Be sure to tighten the upper and lower shock mounting nuts to the specified torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part AL5Z-18125-AG, the Right Choice

To ensure reliability, purchase part # AL5Z-18125-AG Shock Absorber Assembly. It is also called Shock Absorber. OEM parts are of high quality and known for their longevity. This is because they are built to the Ford standards which are relatively high and undergo rigorous quality control testing. This part fits specific Ford Ranger models.

FordPartsGiant.com is a leading supplier of genuine components and accessories such as AL5Z18125AG Shock Absorber Assembly. Looking to purchase quality low-cost OEM Ford parts? You have just found the right place. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly