Additional information needed to check if this part fits
2017 Ford Fusion
Check another vehicle
  • Fitting Vehicle Options: 6 Cyl 2.7L
  • Production Date: From 04/2016

Ford FT4Z-12A648-B Sender Assembly

2015-2023 Ford FT4Z12A648B

Customer Questions & Expert Answers (3)
Ford FT4Z-12A648-B Sender Assembly
  • Part Description
    Sender Assy
  • Base No.
    12A648
  • Replaces
    FT4Z-12A648-A, DY-1298
  • Manufacturer
    Ford
Additional information needed to check if this part fits
2017 Ford Fusion
Check another vehicle
  • Fitting Vehicle Options: 6 Cyl 2.7L
  • Production Date: From 04/2016
$10.32 MSRP: $16.73
You Save: $6.41 (39%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.12A648
    Manufacturer Part NumberFT4Z-12A648-B, FT4Z12A648B
    Part DescriptionSender Assy
    Other NamesCoolant Temperature Sensor, Temperature Sensor
    Item Dimensions6.1 x 4.1 x 4.1 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesFT4Z-12A648-A, DY-1298
    ManufacturerFord
    SKUFT4Z-12A648-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if FT4Z-12A648-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What is the purpose of the coolant temperature indicator system and the CHT and ECT sensors in Ford Fusion? Posted by Customer
    A:
    Four-cylinder engines and 3.SL V6 engines are equipped with a cylinder head temperature sensor instead of a coolant temperature sensor. 2.7L V6 models use both a Cylinder Head Temperature (CHT) sensor and an Engine Coolant Temperature (ECT) sensor. The coolant temperature indicator system consists of a warning light or a temperature gauge on the dash and a coolant temperature sending unit mounted on the engine. On the models covered, the Cylinder Head Temperature (CHT) sensor or Engine Coolant Temperature (ECT) sensor is an information sensor for the Powertrain Control Module (PCM) and also functions as the coolant temperature sending unit for the temperature gauge. Information on the CHT and ECT sensors can be found in 6.
    Posted by FordPartsGiant Specialist
    Q:
    What is the caution regarding the ECT sensor and how should it be installed on Ford Fusion? Posted by Customer
    A:
    The ECT sensor is not to be reused. Install only a NEW ECT sensor once it is removed. The ECT sensor is used on all 1.5L and 1.6L four-cylinder models, 2006 through 2009 3.0L V6 models, and 2.7L V6 models. To remove the ECT sensor on 1.5L and 1.6L models, lift the engine cover and remove the expansion tank and air filter housing outlet duct. Locate the ECT sensor on the thermostat housing, disconnect the electrical connector, remove the retaining clip, and pull out the sensor. For 2006 through 2009 3.0L V6 models, disconnect the electrical connector, pull out the locking tab, rotate the sensor counterclockwise, and remove it from the coolant passage. Inspect the sensor O-ring and replace if necessary. To install, insert the new ECT sensor into the coolant passage and turn it clockwise until the locking tab snaps into place. For 2.7L V6 models, remove the intake manifold, disconnect the electrical connector, unscrew the ECT sensor, and discard it. Install the new ECT sensor and tighten it. Refill the cooling system.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly