Additional information needed to check if this part fits
2017 Ford Fusion
Check another vehicle
  • Fitting Vehicle Options: 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS)
  • Fit Note: Proconve L6 Emissions, Stage V European Emissions
  • Production Date: From 04/2016

Ford DG9Z-5G232-F Exhaust Manifold And Catalyst Assembly

2013-2019 Ford Fusion DG9Z5G232F

Customer Questions & Expert Answers (2)
Ford DG9Z-5G232-F Exhaust Manifold And Catalyst Assembly
  • Part Description
    Exhaust Manifold And Catalyst Assy
  • Replaces
    DG9Z-5G232-C
  • Manufacturer
    Ford
Additional information needed to check if this part fits
2017 Ford Fusion
Check another vehicle
  • Fitting Vehicle Options: 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS)
  • Fit Note: Proconve L6 Emissions, Stage V European Emissions
  • Production Date: From 04/2016
$1274.21 MSRP: $1618.57
You Save: $344.36 (22%)
Core Charge: $250.00
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberDG9Z-5G232-F, DG9Z5G232F
    Part DescriptionExhaust Manifold And Catalyst Assy
    Item Dimensions19.3 x 19.1 x 8.9 inches
    Item Weight17.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesDG9Z-5G232-C
    ManufacturerFord
    SKUDG9Z-5G232-F
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if DG9Z-5G232-F fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to remove and install catalytic converters in Ford Fusion? Posted by Customer
    A:
    All 2006 through 2009 models have catalytic converters that are integral components of the exhaust manifolds and cannot be serviced separately. For 2010 and later models with a 2SL four cylinder engine and Non-Partial Zero Emissions (PZEV) vehicles, the catalyst is located under the vehicle. To remove the catalytic converter, raise the vehicle and place it securely on jackstands. Locate the downstream oxygen sensor on the upper central part of the catalyst, trace the sensor to its electrical connector and disconnect it. Unscrew and remove the downstream oxygen sensor from the catalyst. Remove the nuts and bolts that secure the flange at the front end of the catalyst to the exhaust down pipe. Loosen the fasteners on the clamp that secures the rear end of the catalyst to the exhaust system. Remove the catalytic converter and discard the old gasket between the exhaust down pipe and the catalyst mounting flange. Installation is the reverse of removal, using a new gasket and, if necessary, new fasteners. For Partial Zero Emissions (PZEV) vehicles with a 2.0L engine, the catalytic converter is an integral component of the exhaust manifold and cannot be serviced separately. For V6 engines, the front cylinder head (3.0L engine) has the catalyst as an integral component of the exhaust manifold. For the rear cylinder head (3.0L engine) and front or rear cylinder head (3.5L engine), raise the front of the vehicle and place it securely on jackstands. Remove the engine under cover. Locate the upstream and downstream oxygen sensors, trace their electrical leads to their respective connectors and disconnect them. Remove both oxygen sensors. If the catalyst or exhaust manifold is equipped with a heat shield, remove the heat shield bolts and remove the heat shield from the exhaust manifold. Remove the fasteners that secure the heat shield mounting bracket and remove the bracket. Remove the fasteners that secure the catalyst's upper mounting flange to the exhaust manifold. Remove the fasteners that secure the lower mounting flange to the exhaust pipe. Pull the exhaust pipe down far enough to clear the lower end of the catalyst. Remove the catalyst from the exhaust manifold and remove and discard the old gaskets between the exhaust manifold flange and the upper catalyst flange and, if equipped, between the lower catalyst flange and the exhaust pipe flange. Installation is the reverse of removal, using new flange gaskets.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly