Ford YS4Z-17D957-FAA Cover

1. Chock the front wheels, jack up the rear of the vehicle, and support it on axle stands. Open the trunk or liftgate. 2. Remove the four retaining screws (or nuts on later models) from the upper part of the bumper. 3. Remove the screws securing the fenderwell liners to the rear bumper. 4. Unclip the clips from the lower part of the bumper using a flat-bladed screwdriver. 5. On Sedan models, unscrew the trims from inside the light units and remove. 6. With assistance, withdraw the bumper rearwards from the vehicle while pulling the sides away from the body. 7. Disconnect the electrical connectors from the rear foglight and reversing lamp, if installed.