Ford 4S4Z-14A664-AA Cover And Contact Plate Assembly

In order to disconnect the driver's airbag module, the front wheels must be pointing straight ahead. Then, disconnect the horn switch wiring connector and any applicable multi-plugs for the cruise control switches. Remove the steering wheel and column shrouds and detach the steering column's multi-function switches by pressing the plastic retaining tabs with a flat blade screwdriver. Utilizing a small screwdriver, release the two retaining tabs to remove the clockspring from the steering column whilst being mindful to note the position of the spacing collar in the centre of the clockspring. Put in reverse order the steps of removal for installation, ensuring that front wheels are straight ahead. The clockspring should be centered and its special alignment marks should be aligned with the arrow mark up. In order to center it turn the hubs clockspring counterclockwise until it stops and after that turn it clockwise two and half times so that the arrow mark on the hubs clockspring is aligned with the V mark at the top of the housing. Also, make sure to install the spacing collar.