Ford 4R3Z-3079-B Arm Assembly - Front Suspension

You can Select Your Vehicle to check if 4R3Z-3079-B fits your vehicle.

Loosen the wheel lug nuts, raise the vehicle and support it securely on jackstands. Remove the wheel. Remove the steering knuckle pinch bolt and carefully separate the steering knuckle from the balljoint and control arm. Remove the steering gear mounting fasteners and move the gear enough to remove the forward pivot bolt. Caution: Be careful not to damage the steering gear boot while removing the pivot bolt. Remove the rear mounting fasteners, then remove the control arm and rear mounting bracket. Installation is the reverse of the removal procedure. Be sure to tighten all of the fasteners to the torque. Tighten the lug nuts to the torque. Note: The rear mounting fasteners can be reversed to ease installation; the flag bolts can be inserted from the top of the rear mounting bracket and the nuts can go on the bottom. Have the front wheel alignment checked and, if necessary, adjusted.