Genuine Mercury Zephyr Door Hinge

Every car door opens smoothly with the Mercury Zephyr Door Hinge. By holding the door true to its body, it prevents the sag that makes it difficult to close. After thousands of openings, friction and the weight of the panel wear the pin and bushings on the Mercury hinge, causing misalignment that makes the latch and striker clash. If the owner does not wish to remove the welded assembly, a kit is available to install a hardened steel pin with brass bushings that will restore the Door Hinge to tight factory tolerances and spare the latch from abuse. In the early Zephyr models, the Door Hinge was a more traditional one that did both the job of the pivot action and carried a built-in detent that stopped the door at preset angles. Later on, Mercury cars separate that duty with a check strap with the result that the Door Hinge only guides the movement and carries the weight. The objective of all Zephyr Door Hinges is to ensure that your application is securely attached and operates in a controlled way. As long as you continuously lubricate and replace the pins and bushings, any Mercury Door Hinge will operate like new on a classic Zephyr.

We provide a wide range of Mercury Zephyr Door Hinge at the optimal prices. If you need Mercury Zephyr Door Hinge, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.