Genuine Mercury Tracer Hood Cable

Hood Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

  • Mercury Tracer Hood Cable - F7CZ-16916-AA
    View related parts

    Mercury Tracer Control Cable Assembly

    Part Number: F7CZ-16916-AA
    $103.49 MSRP: $143.76
    You Save: $40.27 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assy - Control; Cable, Cable Assembly, Release Cable
    • Replaces: F5CZ-16916-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-1999 Mercury Tracer | 4 Cyl 1.8L, 4 Cyl 1.9L, 4 Cyl 2.0L | 4AT 4EAT, 4AT F4E-III, 4AT IF4E, 5MT
  • Mercury Tracer Hood Cable - F5CZ-16916-A
    View related parts
    Product Specifications
    • Other Name: CABLE ASY - CONTROL
    • Replaced by: F7CZ-16916-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-1996 Mercury Tracer | 4 Cyl 1.8L, 4 Cyl 1.9L | 4AT 4EAT, 5MT

Mercury Tracer Hood Cable

The Mercury Tracer Hood Cable provides consistent, smooth hood release with just one pull, ensuring the driver does not experience a sticky or snapped cable. The Hood Cable is engineered to run from the dash handle to a junction under the hood, then splits into two lines, each reaching a latch, allowing both sides to unlock at the same time for even safety. Owners of any Mercury model from the popular Tracer family will find this Hood Cable provides easy access for a quick oil check or belt inspection, saving time and fingers from the stuck catch. The outer sheath has a seal that prevents the ingress of grit and water into the inner steel strand, ensuring that this Hood Cable can shrug off corrosion in the winter chill or summer dust. When that sheath finally wears out, wily drivers feel a loose lever or a latch that refuses to pop, clear signs that a Hood Cable replacement will restore that factory fresh feel. This is a precise fit in early single line layouts and in later split systems. So whether the vehicle is a first generation Mercury sedan, a sporty Tracer hatch, or a late nineties wagon, installation is straightforward with no adjustments necessary. Because the length is identical, the Hood Cable maintains tension, and the release handle snaps back crisply after every use, this advantage enhances overall efficiency for every Mercury Tracer on the road. Highly importantly, the materials support the front lock device in the Hood Cable, which strengthens the integral lock. As a result, a strong impact is unlikely to occur. Most Mercury Tracer owners agree that it works especially well while driving over rough roads or parking on steep inclines. Equipping oneself with a Hood Cable ensures any loyal Mercury driver that when the Tracer is needed, it will always open.

We provide a wide range of Mercury Tracer Hood Cable at the optimal prices. If you need Mercury Tracer Hood Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Mercury Tracer Parts