Genuine Mercury Mountaineer Clutch Disc

Friction Disc
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Discs found

  • View related parts

    Mercury Mountaineer Clutch Disc Assembly

    Part Number: 1L2Z-7550-DBRM
    $153.90 MSRP: $207.69
    You Save: $53.79 (26%)
    Product Specifications
    • Other Name: Disc Assy - Clutch
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2002 Mercury Mountaineer | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L Romeo SOHC EFI | 5-Speed Manual Transmission (M5R4), Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Mercury Mountaineer Clutch Disc - 2L2Z-7L596-DA
    View related parts
    Product Specifications
    • Other Name: Kit - Clutch Repair
    • Manufacturer Note: 7600 Pilot Bearing Is Serviced In The 6477 Flywheel Asy Only
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2002 Mercury Mountaineer | 6 Cyl 4.0L SOHC EFI, 8 Cyl 4.6L Romeo SOHC EFI | 5-Speed Manual Transmission (M5R4), Four-Wheel Drive (Full Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Left Hand Drive), Four-Wheel Drive (Part Time) (Right Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Mercury Mountaineer Clutch Disc

The Mercury Mountaineer Clutch Disc provides precise power transfer and smooth shifts that drivers can feel as they push the pedal. The Clutch Disc expertly directs engine torque toward the transmission while disengaging when the pedal is applied to prevent synchros from grinding and ensuring lively acceleration. The friction linings of each Mercury drivetrain engage with the flywheel and the pressure plate before separating cleanly, ensuring effortless shifts whether in city traffic or tackling steep grades. The Clutch Disc acts as a shock absorber for the Mountaineer enthusiast, helping to minimize small engine pulses and making the cabin feel less busy over long distances. The standard organic material offers a nice compromise, delivering good high-temperature resistance while enabling a smooth launch. However, the optional ceramic and metallic coatings on certain Mercury performance packages enhance high-temperature capacity when towing or off-roading. Two configurations are proven by pressures of driving styles: a sprung-hub Clutch Disc with coil springs and a marcel cushion for daily Mercury commutes and a rigid-hub that works with dual mass flywheels for sharper response. The Clutch Disc is compatible with a wide range of Mountaineer years, including the initial V6 models and later V8 models, allowing for a factory-feel restoration without extensive modifications. Regularly replacing the Mountaineer Clutch Disc because heat and wear on the miles will thin out the lining retains the feel of the throttle, protects the flywheel, and avoids expensive slippage in the drivetrain. The new Clutch Disc also provides increased fuel efficiency since power loss due to glazing of surfaces is avoided. Safety is improved by predictably engaging a Mountaineer to launch smoothly into traffic and hold steady on a hill. Significantly, the single unit fits all compatible Mercury platforms that use the 4R70 or 5R55 transmissions. Thus, one part number covers several projects.

We provide a wide range of Mercury Mountaineer Clutch Disc at the optimal prices. If you need Mercury Mountaineer Clutch Disc, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Mercury Mountaineer Parts