Genuine Mercury Milan CV Joint

CV Joint Axle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Joints found

  • View related parts

    Mercury Milan Joint And Stub Shaft

    Part Number: BE5Z-3B414-A
    $119.90 MSRP: $198.18
    You Save: $78.28 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Joint And Stub Shaft Assy
    • Manufacturer Note: Transmission Seal And Bushing Repair Kit
    • Replaced by: BE5Z-3B414-C
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2010-2011 Mercury Milan | 4 Cyl 2.5L Duratec HE PFI | 6-Speed Automatic Transmission 6F Mid-Range, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • View related parts
    Product Specifications
    • Other Name: Joint And Stub Shaft Assy
    • Manufacturer Note: Transmission Seal And Bushing Repair Kit
    • Replaced by: BE5Z-3B414-D
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2010-2011 Mercury Milan | 6 Cyl 3.0L OHC Duratec | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Mercury Milan CV Joint

Mercury Milan CV Joint provides reliability and efficiency to the front wheels, allowing the front wheels to steer and rise and the ride to be controlled. The CV Joint offers great reliability. Its fixed Rzeppa outer section allows for a low angle turning while its plunging tripod inner section enables changes in axle length without stress. Both designs fit every Mercury sedan year, from early four cylinder trims to later V6 or hybrid versions and the whole Milan range. Each CV Joint is sealed in tough rubber boots filled with grease. They keep out the water and dirt that cause the clicks and clunks that tell you it's time to repair or replace. The efficiency of the drivetrain is improved due to the torque delivery, which remains constant even when the vehicle goes over a sharp corner or a bump. The proven CV Joint pair is applied for the front wheel drive and optional all wheel drive versions of Mercury Milan, ensuring that there is just one trusted spec for every Mercury model, thus simplifying parts matching. Models of the Mercury with rear independent suspension also have compact CV Joint units similar to those up front. They articulate smoothly while helping the car maintain a level attitude. Another highlight of the CV Joint is its long service life. Because the boots stay sealed, the CV Joint can keep a Milan going for many thousands of miles with little attention. A brief visual check allows you to notice if there's any damage to the boot, which can protect your fuel economy, suspension geometry, and the quality ride associated with the Milan badge. To put it simply, the Mercury component's robust construction, extensive Milan compatibility, and advanced joint geometry set a new standard for reliability and performance.

We provide a wide range of Mercury Milan CV Joint at the optimal prices. If you need Mercury Milan CV Joint, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Mercury Milan Parts