Genuine Mercury Marquis EGR Valve Position Sensor

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Valve Position Sensors found

  • View related parts
    Product Specifications
    • Other Name: Sensor Assy; EGR Valve, Position Sensor, Sensor
    • Replaces: F67Z-9F483-A2A, F2TZ-9G428-A, F3TZ-9F483-H, E5TZ-9F483-E
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1984-1986 Mercury Marquis | 4 Cyl 2.3L, 6 Cyl 3.8L | 3AT C3, 3AT C5
  • View related parts
    Product Specifications
    • Other Name: SENSOR ASY; EGR Valve, Position Sensor, Valve Sensor
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1984-1986 Mercury Marquis | 4 Cyl 2.3L, 6 Cyl 3.8L | 3AT C3, 3AT C5

Mercury Marquis EGR Valve Position Sensor

The Mercury Marquis EGR Valve Position Sensor maintains a precise exhaust recirculation to keep power up and emissions down. The EGR Valve Position Sensor is attached to the valve body and uses a hardwearing variable resistor to read the shaft travel, transmitting a sharp voltage signal to the engine computer in real time. Real-time feedback allows the module to adjust the burned gases stream just right, which helps Mercury motors avoid spark knock, achieve smooth idle, and pass smog checks without affecting mileage. The single electronic design of the EGR Valve Position Sensor has remained unchanged over the decades, so you won't have to swap the harness for any Marquis trim. EGR Valve Position Sensors are highly valued by owners for their ability to withstand severe heat and vibrations present under the hood of the vehicle. They serve to maintain the fuel economy of the Mercury while also keeping the lights on your dashboard off. The compatibility includes 4.6-liter V8 sedans and earlier carbureted models, so the Marquis' platform never outgrew its original sensor architecture. The sensor's sealed enclosure, gold-plated terminals, and exact ninety-degree sweep give it a market advantage for reliable Mercury and moisture protection. The real-time data is a safety enhancement since a lagging valve can overheat the catalyst. However, this diligent EGR Valve Position Sensor instantly registers changes in position and takes corrective action. As the miles mount up, the consistent readings enable the calibration of the Mercury component to remain steady. Consequently, the aging components of the Marquis can perform like a new one. The always-on EGR Valve Position Sensor in the beloved Marquis sedans ensures that drivers experience steady throttle response, quiet cruising, and cleaner tailpipes. Thanks to its rugged EGR Valve Position Sensor, every Mercury stays in good running condition, and every Marquis is ready for the open road.

We provide a wide range of Mercury Marquis EGR Valve Position Sensor at the optimal prices. If you need Mercury Marquis EGR Valve Position Sensor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Mercury Marquis Parts