Disconnect the cable from the negative battery terminal, then remove the rear hood seal and the Windshield Wiper Motor housing cover by pulling off the rear hood seal weatherstripping and using a small screwdriver to detach each of the wiper housing clips. Next, remove the Windshield Wiper Motor retaining bolts, noting that on later models, the Windshield Wiper Motor linkage must be removed before accessing the motor mounting bolts. After that, remove the clip from the Windshield Wiper Motor and disconnect the wiper linkage drive arm from the motor by prying off the clip with a small screwdriver and detaching the Windshield Wiper Arm from the motor. Unplug the electrical connector and lift the Windshield Wiper Motor from the housing, with installation being the reverse of the removal process.