My Garage
My Account
Cart
Genuine Mercury Grand Marquis Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Accelerator Cables found
Mercury Grand Marquis Accelerator Cable
The Accelerator Cable of the Mercury Grand Marquis instantaneously converts pedal movement into a rotational movement of the throttle. As a result, the Mercury Grand Marquis sedan gets crisp throttle response and reliable pull. The Accelerator Cable runs from the pedal through the firewall to the carburetor or throttle body. It glides in a slick sheath to keep effort low. By physically opening the plate, this Accelerator Cable increases airflow, engine vacuum draws extra fuel, and power increases with the driver's foot. In the late 1970s and 1980s, many Mercury Grand Marquis versions applied an Accelerator Cable, which reduced weight and improved routing around bulky V8 components. The base Grand Marquis trims applied the standard diameter line, but police-package Mercury vehicles often carried a thicker strand. No matter the specifications, the Accelerator Cable attaches to a bracket for easy swap out with simple tools. Subsequent fuel-injected Mercury Grand Marquis models were tied mechanically to the earlier model as proof of its direct feel and fail-safe simplicity.
We provide a wide range of Mercury Grand Marquis Accelerator Cable at the optimal prices. If you need Mercury Grand Marquis Accelerator Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.
Mercury Grand Marquis Accelerator Cable Parts Questions & Experts Answers
- Q: How to remove, install and adjust the accelerator cable on Mercury Grand Marquis?A:To remove the air intake duct, disconnect the accelerator cable from the throttle lever and the cruise control cable from the cable bracket. To remove it from the accelerator pedal recess, separate the accelerator cable from the cable bracket. You can detach the accelerator cable clips from the Intake Manifold and valve cover and take out the cable through firewall. Reverse removal steps for installation while ensuring proper cable routing. Apply sealant if necessary to prevent water entry. Measure freeplay at the accelerator pedal (3/64 to 1/8-inch) to adjust. Loosen the locknut on the cable bracket and adjust deflection within the specified range.
