The Lincoln MKT Oil Cooler Hose is designed to protect the twin turbo power plant by removing hot lubricant from the block so it can cool and return with the right viscosity. This simple act keeps the power strong and protects the parts. The Oil Cooler Hose is situated on the driver side of all the Lincolns in the series. It connects the pressurized oil gallery to an oil to water exchanger which lives inside the standard radiator tank. So start up warmth makes it here quickly, while peak heat never gets out of hand during towing, steep climbs, or long highway blasts. Over the course of MKT production, earlier Lincoln builds were fitted with a rubber lined Oil Cooler Hose that was suited for daily driving. Later edition MKTs got a composite layered Oil Cooler Hose rated for 150 psi and temperatures near 300 degrees Fahrenheit which doubled the service life while virtually eliminating leaking. As a result of the upgrade, Lincoln owners were confident to push harder with their SUVs without the risk of the Oil Cooler Hose bursting or splitting. All years of MKT build require one Oil Cooler Hose that needs to be cut to length and angle so that it can thread through the engine bay without kinking up thereby allowing the oil to flow freely and not chafe against anything nearby. With the Oil Cooler Hose by VIN, the current Lincoln models benefit from plug-in simplicity for straightforward installation, requiring no rewiring, just easy fitment that restores factory grade efficiency to modern MKT drivers. The Oil Cooler Hose, which is a reliable product, plays a crucial role in fuel economy, emission control, and safety. Every Lincoln MKT can cruise, haul, or climb coolly and confidently with no worries.
We provide a wide range of Lincoln MKT Oil Cooler Hose at the optimal prices. If you need Lincoln MKT Oil Cooler Hose, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.