Genuine Lincoln Corsair Ignition Coil Boot

Ignition Wire Protection Boot
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coil Boots found

  • View related parts

    Lincoln Corsair Ignition Wire Protection Boot

    Part Number: JX6Z-12A402-B
    $7.25 MSRP: $11.75
    You Save: $4.50 (39%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Boot - Ignition Wire Protection; Boot
    • Replaces: JX6Z-12A402-A, WR-6160
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2020-2022 Lincoln Corsair | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
  • Lincoln Corsair Ignition Coil Boot - P2GZ-12A402-A
    Diagram for Lincoln Corsair Ignition Coil Boot - P2GZ-12A402-A
    View related parts

    Lincoln Corsair BOOT - IGNITION WIRE PROTECTIO

    Part Number: P2GZ-12A402-A
    $10.52 MSRP: $14.99
    You Save: $4.47 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Boot
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2023-2025 Lincoln Corsair | 4 Cyl 2.0 L GAS

Lincoln Corsair Ignition Coil Boot

The Lincoln Corsair Ignition Coil Boot transfers spark reliably, so each journey is thrilling and efficient. This little rugged piece is trusted by drivers and realizes that the heat-resistant rubber body of this component allows it to send high voltage directly to the spark plug without any leak or power loss. This promotes steady acceleration and less fuel use. Moreover, the Corsair has been praised for quiet and misfire-free starts. Whether you have a new 2020 Lincoln crossover or a later model year, the Ignition Coil Boot installs in the same manner. Owners can avoid part guessing and enjoy headache-free maintenance. It takes only minutes to match the original length then snap the Ignition Coil Boot into place on a cool engine, but that quick swap protects the coils and plugs and keeps the Lincoln powertrain running. Each Corsair adopts a similar ignition architecture, so the specification for the Ignition Coil Boot, which is of high quality, is therefore also factory specification, making it a smart engineering solution with safety simplicity. Made of flexible and heat-resistant rubber, each Ignition Coil Boot will resist hardening even after thousands of heat cycles, which will keep the Lincoln cabin free of rough vibrations while also allowing the driver to feel smooth, confident pull with every touch of the throttle. The component also enables onboard monitors to achieve optimum timing, which means cleaner emissions and better mileage, two metrics important to Corsair drivers desiring performance without compromise. Furthermore, a good Ignition Coil Boot makes it difficult for stray arcs to form, which could cause the engine to stumble when it is highly critical, such as during merging or overtaking. Including installation with silicone and universal compatibility, this Ignition Coil Boot makes a mark and gives the Corsair an edge as a small but mighty mod that produces reliable spark. By routinely inspecting and replacing the spark plugs and ignition coils in the Lincoln Corsair, peak spark integrity and long-term efficiency are maintained.

We provide a wide range of Lincoln Corsair Ignition Coil Boot at the optimal prices. If you need Lincoln Corsair Ignition Coil Boot, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Lincoln Corsair Parts