Genuine Ford Windstar Wheel Bearing Dust Cap

Wheel Hub Dust Cover
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearing Dust Caps found

  • View related parts

    Ford Windstar Seal

    Part Number: F3DZ-1N135-A
    $43.42 MSRP: $62.38
    You Save: $18.96 (31%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Dust Cap, Grease Cap
    • Position: Rear
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1997-2003 Ford Windstar | 6 Cyl 3.0L, 6 Cyl 3.8L | 4AT 4F50N, 4AT AX4S
  • View related parts
    Product Specifications
    • Other Name: Cap - Grease
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1995-1997 Ford Windstar | 6 Cyl 3.0L, 6 Cyl 3.8L | 4AT AX4S, 4AT AXOD-E

Ford Windstar Wheel Bearing Dust Cap

The purpose of the Ford Windstar Wheel Bearing Dust Cap is to seal the grease inside the hub and keep dirt out, allowing the minivan to have smooth, quiet wheels. To maintain a clean lubricant bath that minimizes friction, controls noise, and prevents steering shake, the Wheel Bearing Dust Cap seals the cavity. The steel exterior of this unit is dent-resistant and heat-resistant, which is an important reason why drivers trust it. Due to the use of a press fit Wheel Bearing Dust Cap on earlier Ford vans that feature serviceable roller bearings and a slim snap-in version being accepted by later Windstar assemblies, both styles aim to achieve the same purpose. This single part is suitable for multiple years and trims of Windstar for repair. Fast installation pays off quickly because the Wheel Bearing Dust Cap blocks moisture that could corrode bearings and bring costly brake fade. Keeping grease where it belongs will also help prevent uneven tire wear and enhance safety for every member of the Ford family. The cap's flush fit minimizes rotational drag, allowing for welcome fuel savings thanks to lightweight construction and precise machining. According to the test results, the Wheel Bearing Dust Cap will not come off after repeated wheel removals. Owners can easily rotate tires without any worries of losing the cover. A finish compatible with factory hardware maintains the factory appearance that many Ford fans enjoy seeing behind alloy wheels. The precise diameter of the Wheel Bearing Dust Cap guarantees that the fit is snug and will not rattle on rough pavement as is the case with each Windstar. Many drivers even keep a spare Wheel Bearing Dust Cap in the glovebox for quick roadside replacement. Opt for the Ford Wheel Bearing Dust Cap for your Windstar and enjoy dependable protection with every trip. Ford is able to maintain the Windstar reputation for lasting value thanks to reliable hardware.

We provide a wide range of Ford Windstar Wheel Bearing Dust Cap at the optimal prices. If you need Ford Windstar Wheel Bearing Dust Cap, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Ford Windstar Parts