Genuine Ford Police Interceptor Sedan Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Heat Shields found

View related parts
Ford Police Interceptor Sedan Shield
Part Number: DA8Z-5E258-A
$24.05 MSRP: $35.17
You Save: $11.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Shield, Lower Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Police Interceptor Sedan | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX
View related parts
Ford Police Interceptor Sedan Exhaust Manifold Heat Shield
Part Number: FB5Z-9A462-A
$28.09 MSRP: $41.07
You Save: $12.98 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold Heat; Heat Shield, Upper Shield
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Police Interceptor Sedan | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX
View related parts
Ford Police Interceptor Sedan Exhaust Manifold Heat Shield
Part Number: FB5Z-9A462-B
$20.44 MSRP: $29.88
You Save: $9.44 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold Heat; Heat Shield, Upper Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Police Interceptor Sedan | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX
View related parts
Ford Police Interceptor Sedan Exhaust Manifold Heat Shield
Part Number: GB5Z-9Y427-A
$22.32 MSRP: $32.63
You Save: $10.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold Heat; Heat Shield, Upper Shield
- Position: Driver Side
- Replaces: AA5Z-9Y427-A, AA5Z-9Y427-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Police Interceptor Sedan | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX
View related parts
Ford Police Interceptor Sedan Exhaust Manifold Heat Shield
Part Number: GB5Z-9A462-A
$24.69 MSRP: $35.17
You Save: $10.48 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold Heat; Heat Shield, Upper Shield
- Position: Passenger Side
- Replaces: AA5Z-9A462-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford Police Interceptor Sedan | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX

Ford Police Interceptor Sedan Exhaust Heat Shield

The Exhaust Heat Shield for Ford Police Interceptor Sedan, engineered with advanced design, draws exhaust heat away from critical components for cooler operation of pursuit vehicles to enable hard acceleration. The Exhaust Heat Shield is a custom shield designed and produced specifically for Ford pursuit vehicles. This shield traps heat and helps expel gases faster. Further, it effectively reduces the temperature in the engine bay by almost half. The Police Interceptor Sedan consumes the direct airflow from the cooler bay air for added horsepower without extra fuel consumption. Every Exhaust Heat Shield protects hot wiring and brake lines from radiant heat to ensure they don't fail during unexpected idle to speed-up events. In early Ford models, a rigid stainless Exhaust Heat Shield was installed to reflect heat due to the manifolds. Subsequent updates added a layered composite Exhaust Heat Shield made from a mix of metal and insulating fabric to reduce weight while also soaking up and releasing heat gradually so that the Police Interceptor Sedan fleet can be mission-ready. Both versions can endure the hard-use cycle that any Ford cruiser is likely to face and have proven to deliver long-term durability that Police Interceptor Sedan agencies trust. This tight Exhaust Heat Shield prevents rattles or scraping so that officers can focus on the road, not strange noises. If you hear metallic rattling, it's likely due to the Exhaust Heat Shield either cracking or loosening. Replacing it quickly should restore the component to its original mechanism designed by Ford. The part can be mounted straight onto multiple production years of the Police Interceptor Sedan thanks to its factory mounting points allowing a new Exhaust Heat Shield to be swapped on without custom fitting. This interchangeability reduces downtime and keeps the Ford units working. Moreover, it proves why the shield stands out in the market as a small yet crucial upgrade that boosts efficiency and strengthens safety for the dedicated Police Interceptor Sedan.

We provide a wide range of Ford Police Interceptor Sedan Exhaust Heat Shield at the optimal prices. If you need Ford Police Interceptor Sedan Exhaust Heat Shield, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.