Genuine Ford Focus Transfer Case Output Shaft Snap Ring

Transfer Case Output Shaft Retaining Snap Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Transfer Case Output Shaft Snap Rings found

View related parts
Ford Focus Snap Ring
Part Number: AE8Z-7064-A
$8.53 MSRP: $13.25
You Save: $4.72 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: 35 X 1.8
- Replaces: -W790194-S900
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 6-Speed Automatic Transmission DPS6, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Snap Ring
Part Number: AE8Z-7064-B
$7.72 MSRP: $12.00
You Save: $4.28 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: 71.5 X 2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 6-Speed Automatic Transmission DPS6, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Snap Ring
Part Number: CM5Z-7064-B
$11.70 MSRP: $16.67
You Save: $4.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 1-Speed Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Snap Ring
Part Number: CM5Z-7064-A
$9.36 MSRP: $13.33
You Save: $3.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | 3 Cyl 1.0L EcoBoost 120PS/125PS/140PS, 4 Cyl 2.0L DI TIVCT Petrol, 4 Cyl 2.0L EcoBoost (240PS) , Electric Motor | 1-Speed Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Focus Transfer Case Output Shaft Snap Ring

The Ford Focus Transfer Case Output Shaft Snap Ring secures the driveline, enabling smooth and predictable torque travel to any axle mode. The Transfer Case Output Shaft Snap Ring is a small circle of steel. It may be small but is tough enough to handle hard spinning. Ford drivers can feel safe when driving in the city or climbing up gravel. The Transfer Case Output Shaft Snap Ring prevents gear lash, increases efficiency, reduces vibration, and lowers fuel consumption by locking in the output shaft. The firm profile additionally ensures that Ford part-time selections from 2WD to 4WD High or Low engage cleanly, while in AWD settings it maintains perfect clearance for center differentials, allowing the front and rear shafts to spin at their own pace without binding. The early Focus ZX3 hatches, the later Focus sedans, and the current Focus sport trims are all compatible, so owners across all generations are assured the same dependable Transfer Case Output Shaft Snap Ring is looking after their driveline. As past versions relied on a thinner stamped ring for lever shifters, the Ford Focus all-wheel systems with a thicker circlip show the Transfer Case Output Shaft Snap Ring can change and still be exceptionally robust. Ford owners love the compact size and its ability to click into the groove in seconds, but the real advantage is felt over the years when the Transfer Case Output Shaft Snap Ring controls thrust loads on each throttle surge. The system prevents unintended disengagements, allowing braking events to remain stable, steering to stay consistent, and crash avoidance electronics to respond as the Ford chassis software would anticipate. Drivers only notice how immediately their Focus responds when the weather changes because this Transfer Case Output Shaft Snap Ring is an unsung hero.

We provide a wide range of Ford Focus Transfer Case Output Shaft Snap Ring at the optimal prices. If you need Ford Focus Transfer Case Output Shaft Snap Ring, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.