Genuine Ford F53 Stripped Chassis Intake Manifold Gasket

Engine Intake Manifold Gasket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Model

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Intake Manifold Gaskets found

View related parts
Ford F53 Stripped Chassis Gasket
Part Number: 4C2Z-9461-AA
$18.31 MSRP: $26.77
You Save: $8.46 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Manifold Gasket
- Replaces: 2C3Z-9461-AA, 2C3Z-9461-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F53 Stripped Chassis | 10 Cyl 6.8L SOHC EFI NA | 5-Speed Automatic Transmission 5R110W NAAO, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford F53 Stripped Chassis Intake Manifold Gasket
Part Number: 4R3Z-9439-AA
$5.77 MSRP: $8.37
You Save: $2.60 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Gasket - Intake Manifold; Intake Manifold Gasket, Manifold Gasket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford F53 Stripped Chassis | 10 Cyl 6.8L EFI | 5-Speed Automatic Transmission 5R110W NAAO, 6-Speed Automatic Transmission (6R140), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2004-2009 Ford F53 Stripped Chassis | 10 Cyl 6.8L EFI | 5-Speed Automatic Transmission 5R110W NAAO, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford F53 Stripped Chassis Gasket
Part Number: 4C2Z-9461-BA
$5.16 MSRP: $7.36
You Save: $2.20 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Manifold Gasket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F53 Stripped Chassis | 10 Cyl 6.8L SOHC EFI NA | 5-Speed Automatic Transmission 5R110W NAAO, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford F53 Stripped Chassis Intake Manifold Gasket
Part Number: 4C2Z-9439-AA
$33.11 MSRP: $47.17
You Save: $14.06 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Gasket - Intake Manifold; Gasket, Manifold Gasket
- Manufacturer Note: One package consists of 2 pieces. Two(2) pieces required per engine
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford F53 Stripped Chassis | 10 Cyl 6.8L SOHC EFI NA | 5-Speed Automatic Transmission 5R110W NAAO, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford F53 Stripped Chassis Intake Manifold Gasket

The Ford F53 Stripped Chassis Intake Manifold Gasket ensures a tight, heat-resistant seal, keeping combustion air and fuel just where your engine needs them. This gives motor home owners a confident power-up on every climb. The purpose of the gasket is to create a bridge between the manifold and the block. Ultimately, this prevents any dirt, air, or coolant from entering the big V8. As a result, the large V8 motor is able to idle smoothly and respond instantly to throttle demand. The Intake Manifold Gasket sharpens pedal response because it holds vacuum under hard acceleration, making merging safer and less stressful for the driver. A molded heat-resistant rubber over a rigid composite backbone is designed so that the Intake Manifold Gasket can flex with thermal expansion without warping after long miles. Many owners report that the Ford component is so durable, it is much like the chassis itself. Many who installed a replacement Intake Manifold Gasket report service lasting a decade. The chamfering of the sealing lip by age may cause the driver to see vacuum leaks and overheating. However, a new Intake Manifold Gasket will quickly restore factory tightness and fuel economy for any Ford F53 Stripped Chassis. The F53 Stripped Chassis that is gasoline-powered; older and newer versions take the same Intake Manifold Gasket, so one can be carried with confidence. When the Ford seal is torqued to specification, it can shrug off both uphill climbs, intense desert heat, and stop-and-go traffic, allowing the heavy F53 Stripped Chassis to achieve steady fuel economy and low emissions. The Intake Manifold Gasket stands out in a crowded market thanks to its precision molding, corrosion-proof bead, and factory matched profile, providing robust reliability on every Ford-powered journey and ensuring the F53 Stripped Chassis gets to the next campsite drama-free. Selecting a quality Intake Manifold Gasket maintains the Ford tradition of tough travel.

We provide a wide range of Ford F53 Stripped Chassis Intake Manifold Gasket at the optimal prices. If you need Ford F53 Stripped Chassis Intake Manifold Gasket, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.