How to fix the front wiper motor. First of all, put off the wiper arm nuts and note their position on the wiper shafts before, both arms to be removed. After that, remove the plastic cowl cover, pull the electrical connector of the wiper motor, and then remove two screws to extract wiper motor and link assembly. Remove the linkage by slowly prying it from the motor's crank arm with a trim removal tool or a screwdriver, and unbolt the nut holding the crank arm to the motor shaft. Locate the crank arm position to the motor shaft, where you have to remove the crank arm to use it as a template after loosening the two motor mounting bolts to pull out the motor from this bracket. For the rear wiper motor, start like this, you have to drop the wiper arm nut and note the position of the arm on the shaft before you take off the wiper arms. Then, to gain access, pop out the lift gate trim panel, unplug the electrical connection of the wiper motor and then pull out the mounting bolts to pull out the wiper motor. Disassembly and installation processes of both motors are contrary to the steps discussed above.