Genuine Ford E-250 Ignition Coil Boot

Ignition Wire Protection Boot
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil Boot found

  • View related parts

    Ford E-250 Boot - Ignition Wire Protection

    Part Number: F7TZ-12A402-AA
    $8.11 MSRP: $13.84
    You Save: $5.73 (42%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Boot
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1997-2019 Ford E-250 | 10 Cyl 6.8L SOHC EFI NA, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Automatic Transmission 5R110W - HI/Torque, 5-Speed Automatic Transmission 5R110W NAAO, 6-Speed Automatic Transmission (6R140)

Ford E-250 Ignition Coil Boot

The Ford E-250 Ignition Coil Boot channels high voltage to the spark plug while blocking heat and moisture, so you get immediate engine starting response. Manufactured with a durable rubber compound that is resistant to cracking and vibration, this Ignition Coil Boot blocks stray arcs that lead to misfires, a rough idle, and shaky acceleration. As the same profile fits every E-250, the driver can exchange the Ignition Coil Boot between early vans and late models without searching for a trim specific part. The universal fit helps to streamline the fleet as one Ignition Coil Boot stock can cover the base, extended, and heavy-duty editions of the E-250 while saving storage space. The thick sleeve assists in car engine performance by properly supplying voltage, which helps to make fuel burn more cleanly to increase mileage and cut emissions. As a result, there is a reduced likelihood of backfires damaging catalytic converters or triggering dashboard warning lights. Hence, the passengers in the cabin of the Ford E-250 remain composed. The tests prove that the Ignition Coil Boot remains intact after countless heat cycles. Each Ford van is known for its sturdy reputation. For this reason, the Ford van goes on job sites right into delivery routes and highway trips. The installation process remains easy enough for a beginner. Just cool the Ford engine, pull the coil, twist off the old sleeve, add a dab of dielectric grease, seat the new Ignition Coil Boot, then reconnect. In under ten minutes of work, an improvement in throttle response and idle smoothness is proof that fitting a new Ignition Coil Boot on an E-250 is a little fix with big reward. When your E-250 is showing signs of stumbling starts, choose this trusted Ignition Coil Boot to maintain your Ford rolling reliably day after day.

We provide a wide range of Ford E-250 Ignition Coil Boot at the optimal prices. If you need Ford E-250 Ignition Coil Boot, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your doorstep with a fast delivery service.

Related Ford E-250 Parts