What precautions should be taken when working with front shock absorbers, and How to remove and install on 2001 Ford Excursion?

The shock absorbers are pressurized with nitrogen gas; do not attempt to open, puncture, or apply heat to them. For a 2WD model, open the hood and remove the shock absorber upper mounting nut, washer, and bushing. Loosen the front wheel lug nuts, raise the front of the vehicle, support it securely on jackstands, block the rear wheels, and set the parking brake before removing the front wheel. Support the outer end of the axle with a floor jack, and for a 4WD model, remove the shock absorber upper mounting nut. Next, remove the shock absorber lower mounting nut and, for 4WD models, the bolt, then take out the shock absorber. Installation follows the reverse order of removal with the addition of tightening the nuts and bolts to the specified torque, installing the wheel and lug nuts, lowering the vehicle, and tightening the lug nuts to the specified torque.

Genuine 2001 Ford Excursion Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Shock Absorbers found

View related parts
2001 Ford Excursion Shock Absorber Kit
Part Number: 6U2Z-18V125-A
$43.10 MSRP: $58.90
You Save: $15.80 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Shock, Shock Absorber
- Manufacturer Note: Shock kit - includes attaching hardware, 4X4 - Replace in pairs
- Replaces: YC3Z-18125-AB, YC3Z-18125-AC
- Base No.: 18V125
- Item Weight: 5.90 Pounds
- Item Dimensions: 26.8 x 3.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6U2Z-18V125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-AC
$43.10 MSRP: $58.90
You Save: $15.80 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x4 - 7.3L, BEFORE 5/13/02
- Replaced by: 6U2Z-18V125-A
- Item Weight: 5.90 Pounds
- Item Dimensions: 28.1 x 3.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-AB
$43.10 MSRP: $58.90
You Save: $15.80 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x4 - 6.8L, BEFORE 5/13/02
- Replaced by: 6U2Z-18V125-A
- Item Weight: 5.80 Pounds
- Item Dimensions: 27.6 x 3.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Kit
Part Number: 5U2Z-18V125-G
$25.42 MSRP: $35.31
You Save: $9.89 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber
- Base No.: 18V125
- Item Weight: 3.90 Pounds
- Item Dimensions: 24.7 x 3.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V125-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-EA
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x2 - 5.4L, BEFORE 5/13/02
- Item Weight: 5.80 Pounds
- Item Dimensions: 25.8 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-DA
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x2 - 7.3L, BEFORE 5/13/02
- Item Weight: 6.00 Pounds
- Item Dimensions: 25.5 x 3.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-CA
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x2 - 6.8L, BEFORE 5/13/02
- Replaced by: BU2Z-18V125-M
- Item Weight: 6.00 Pounds
- Item Dimensions: 27.0 x 3.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Assembly
Part Number: YC3Z-18125-AA
Product Specifications
- Other Name: Shock Absorber Assy
- Manufacturer Note: 4x4 - 5.4L, BEFORE 5/13/02
- Replaced by: BU2Z-18V125-L
- Item Weight: 7.30 Pounds
- Item Dimensions: 4.7 x 3.6 x 27.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-18125-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Kit
Part Number: 6U2Z-18V125-B
Product Specifications
- Other Name: Kit - Shock Absorber; Shock, Shock Absorber
- Manufacturer Note: Shock kit - includes attaching hardware, 4X2 - replace in pairs
- Base No.: 18125
- Item Weight: 6.20 Pounds
- Item Dimensions: 26.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6U2Z-18V125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 7.3L | 4AT 4R100
View related parts
2001 Ford Excursion Shock Absorber Kit
Part Number: 5U2Z-18V124-GA
Product Specifications
- Other Name: Kit - Shock Absorber
- Manufacturer Note: Shock kit - includes attaching hardware, 4X4, Must replace in pairs
- Base No.: 18124
- Item Weight: 11.40 Pounds
- Item Dimensions: 25.8 x 3.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V124-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

2001 Ford Excursion Shock Absorber

At FordPartsGiant.com, you will find an extensive inventory of genuine 2001 Ford Excursion Shock Absorber offered at competitive prices online. These manufacturer-backed OEM 2001 Ford Excursion Shock Absorber ensure your satisfaction with their quality and come with a hassle-free return policy and expedited delivery service, guaranteeing a delightful shopping experience.

2001 Ford Excursion Shock Absorber Parts Questions & Experts Answers

Q: What precautions should be taken when working with front shock absorbers, and How to remove and install on 2001 Ford Excursion?
A: The shock absorbers are pressurized with nitrogen gas; do not attempt to open, puncture, or apply heat to them. For a 2WD model, open the hood and remove the shock absorber upper mounting nut, washer, and bushing. Loosen the front wheel lug nuts, raise the front of the vehicle, support it securely on jackstands, block the rear wheels, and set the parking brake before removing the front wheel. Support the outer end of the axle with a floor jack, and for a 4WD model, remove the shock absorber upper mounting nut. Next, remove the shock absorber lower mounting nut and, for 4WD models, the bolt, then take out the shock absorber. Installation follows the reverse order of removal with the addition of tightening the nuts and bolts to the specified torque, installing the wheel and lug nuts, lowering the vehicle, and tightening the lug nuts to the specified torque.

Related 2001 Ford Excursion Parts

Alternate Year Models

2000 Ford Excursion Shock Absorber 2002 Ford Excursion Shock Absorber