How do I remove the under dash panel and locate the brake light switch assembly on Ford Crown Victoria?

Remove under dash panel. Locate brake light switch near top of brake pedal and disconnect from pedal by removing retaining clip. Disconnect switch and booster pushrod from pedal arm, keeping spacers. Unlock electrical connector with screwdriver and unplug from switch. Disengage clip inside connector. Install switch to connector by snapping clip into place. Reconnect assembly to brake pedal. Install under dash panel. Check brake lights for proper operation.

Genuine Ford Crown Victoria Brake Light Switch

Brake Lamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Brake Light Switches found

View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: F87Z-13480-AA
- Other Name: Stoplamp Switch
$32.16 MSRP: $45.64
You Save: $13.48 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
Less Info
View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: E9TZ-13480-A
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
$17.67 MSRP: $28.18
You Save: $10.51 (38%)

Add to Cart
More Info
Fits the following Vehicles:
2003-2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
Less Info
View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: FOAZ-13480-A
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
- Manufacturer Note: Calif Emission Standards
$62.49 MSRP: $83.82
You Save: $21.33 (26%)

Add to Cart
More Info
Fits the following Vehicles:
1992-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
Less Info

Ford Crown Victoria Brake Light Switch Parts Questions & Answers

Switch Assembly - Stop Light
FOAZ-13480-A
Q: How do I remove the under dash panel and locate the brake light switch assembly on Ford Crown Victoria?
A: Remove under dash panel. Locate brake light switch near top of brake pedal and disconnect from pedal by removing retaining clip. Disconnect switch and booster pushrod from pedal arm, keeping spacers. Unlock electrical connector with screwdriver and unplug from switch. Disengage clip inside connector. Install switch to connector by snapping clip into place. Reconnect assembly to brake pedal. Install under dash panel. Check brake lights for proper operation.