Turbocharger, Piping & Heat Shields & Related Parts fit your 1996 Ford E-350/E-350 Super Duty 8 Cyl 7.3L Diesel Turbocharged 3-Speed Automatic Transmission C6

My Vehicle Change Vehicle

1996 Ford E-350/E-350 Super Duty

8 Cyl 7.3L Diesel Turbocharged; 3-Speed Automatic Transmission C6

My Vehicle Change Vehicle

1996 Ford E-350/E-350 Super Duty

8 Cyl 7.3L Diesel Turbocharged; 3-Speed Automatic Transmission C6

Categories Close X

You have selected

Engine

Other Categories

Accelerator Linkage, Air Cleaner & Speed Control

Air Conditioner, Radio & Shock Absorbers

Alternator, Battery, Distributor & Starter

Automatic Transmission

Console, instruments, mirrors, windshield

Door glass and fittings

EM Exterior Moulding

Fenders & Hood

Frame, Exhaust System & Springs

Front Axle & Steering

Fuel System & Manifolds

Fuel filler, luggage carrier, rear door

IT Body & Soft Trim Parts

Lamps & Wiring

Radiator & Grill

Rear Axle, Drive & Coupling Shafts

SM Sheet metal

Seats and belts

Speedometer, Bumpers, Mirrors & Wipers

Wheels & Brakes

Parts Questions

Sort by:

Recommended

Part No. & Part Description

Price

Part No. &
Part Description

F4TZ-9E436-A
GASKET (FUEL RAIL TO PLENUM)
Gasket
Seal-Turbo compressor outlet(mounts between 6K682 & 6K889), DI Turbo, BEFORE 12/7/98
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  9E436
- Callout Name:
  9E436
MSRP: $8.86
$6.74
1
Add To Cart

O RING (OIL DRAIN)
F4TZ-6N653-A
Gasket
Small- Mounts on top and below turbo pedestal 1 used on top 1 used on bottom of pedestal
Fit Note:
8 Cyl 7.3L
Require Quantity:
2
Package Quantity:
2
Base Number:
6N653
Callout Name:
6N653
MSRP: $5.51
$4.19
2
Add To Cart
F4TZ-6N653-B
Gasket
Large- Mounts on top and below turbo pedestal 1 used on top 1 used on bottom of pedestal
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  2
- Package Quantity:
  2
- Base Number:
  6N653
- Callout Name:
  6N653
MSRP: $1.95
$1.49
2
Add To Cart
F81Z-6N653-BA
Gasket
Repair kit- consists of 7 seals,2 bolts,1 clip and a ring.
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6N653
- Callout Name:
  6N653
MSRP: $128.31
$76.31
1
Add To Cart

HOSE (AIR CLEANER TO TURBO)
F7UZ-9C681-AA
Hose - Air Inlet
Kit to replace orange turbo inlet asy., BEFORE 10-23-97
Fit Note:
8 Cyl 7.3L
Base Number:
9C623
Callout Name:
9C681
MSRP: $170.00
$116.28
1
Add To Cart
F4TZ-9C681-D
Hose - Air Inlet
Orange turbo inlet hose, BEFORE 10-23-97
- Fit Note:
  8 Cyl 7.3L
- Callout Name:
  9C681
- Replaced By:
  F7UZ-9C681-AA
MSRP: $170.00
$116.28
1
Add To Cart

F4TZ-6N640-B
EXHAUST GASKET (INLET)
Gasket
Flange gasket between Turbo Outlet to Exhaust Inlet.
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6N640
- Callout Name:
  6N640
MSRP: $15.15
$11.52
1
Add To Cart

BOLT (INJECTOR PUMP GEAR)
-1821648-C1
Nut
Nut; Retains Turbo to Turbo Y adaptor
Fit Note:
8 Cyl 7.3L
Require Quantity:
4
Package Quantity:
1
Base Number:
1821648-C1
Callout Name:
9N517
MSRP: --
$13.73
1
Add To Cart
-1821641-C1
Bolt
M10 Bolt; Retains Turbo to Turbo Y adaptor
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  4
- Package Quantity:
  1
- Base Number:
  1821641-C1
- Callout Name:
  9N517
MSRP: $42.00
$23.94
1
Add To Cart
F4TZ-9N517-A
Bolt
Bolt-M10 x 35 mounts 9155 fuel/water separator, DI Turbo, BEFORE 1/5/98
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  2
- Package Quantity:
  2
- Base Number:
  9N517
- Callout Name:
  9N517
MSRP: $3.32
$2.73
2
Add To Cart
F4TZ-9N517-C
Bolt
Bolt-M8 x 70mm hex flange..Attach high pressure oil inj pump(9A543). #1818726-C1.
- Fit Note:
  8 Cyl 7.3L
- Callout Name:
  9N517
- Replaced By:
  3C3Z-9N517-AA
MSRP: $6.53
$5.35
1
Add To Cart

-1821648-C1
HARDWARE
Nut
- Base Number:
  1821648-C1
- Callout Name:
  1821648-C1
MSRP: --
$13.73
1
Add To Cart

-1821641-C1
HARDWARE
Bolt
- Base Number:
  1821641-C1
- Callout Name:
  1821641-C1
MSRP: $42.00
$23.94
1
Add To Cart

-1817993-C1
HARDWARE
Bolt
- Base Number:
  1817993-C1
- Callout Name:
  1817993-C1
MSRP: $8.18
$4.79
1
Add To Cart

CLAMP (HOSE)
F4TZ-8287-A
Clamp - Hose
3 1/2" clamp. Air inlet hose to Turbo inlet 2 required. (1 per package), DI Turbo
Fit Note:
8 Cyl 7.3L
Require Quantity:
2
Package Quantity:
1
Base Number:
8287
Callout Name:
8287
MSRP: $8.29
$5.34
1
Add To Cart
F4TZ-8287-B
Clamp - Hose
Turbo outlet clamp
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  8287
- Callout Name:
  8287
MSRP: $14.11
$9.08
1
Add To Cart
F4TZ-8287-AAA
Clamp - Hose
2 1/2" worm clamp; Attaches turbo air outlets from "Y" adaptor to cylinder head inlet., DI Turbo
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  4
- Package Quantity:
  4
- Base Number:
  8287
- Callout Name:
  8287
MSRP: $4.44
$2.85
4
Add To Cart
F5TZ-8287-A
Clamp - Hose
Mega-Torque Clamp 1 1/2"
- Callout Name:
  8287
F5TZ-8287-B
Clamp - Hose
Mega-Torque Clamp 1 3/4"
- Base Number:
  8287
- Callout Name:
  8287
MSRP: $26.00
$16.73

HOSE (FUEL TANK TO FILLER PIPE)
F3UZ-9047-G
Hose - Filler Pipe
20" long. Also serviced in 9B149 kits, Cutaway/Stripped Chassis, FROM 4/12/93
Base Number:
9047
Callout Name:
9047
MSRP: $47.00
$32.99
1
Add To Cart
F2UZ-9047-A
Hose - Connecting
Approx. 10" long - use with midship fuel tank, diesel
- Callout Name:
  9047
- Replaced By:
  F7UZ-9047-BE
MSRP: $191.67
$131.10
1
Add To Cart
F7UZ-9047-BE
Hose - Connecting
Also serviced in 9047. Cadbar II hose material with bonded 9A064 clamp. Also includes 1 loose 9A064 clamp for attaching to 9034 steel pipe, gas unleaded/leaded fuel, midship fuel tank
- Base Number:
  9047
- Callout Name:
  9047
MSRP: $191.67
$131.10
1
Add To Cart
E1TZ-9047-B
Hose - Filler Pipe
Use with aft axle fuel tank, exc. Cutaway
- Base Number:
  9047
- Callout Name:
  9047

-1821642-C3
HARDWARE
Stud
- Base Number:
  1821642-C3
- Callout Name:
  1821642-C3
MSRP: $13.80
$8.07
1
Add To Cart

BRACKET ASY. (TURBORCHARGER HEAT SHIELD)
-W300003-
Bolt
Attaches 9G479 to intake
Fit Note:
8 Cyl 7.3L
Require Quantity:
2
Package Quantity:
4
Callout Name:
9G479
MSRP: $1.92
$1.12
4
Add To Cart
F5UZ-9G479-A
Bracket
Heat shield mounting bracket
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  9G479
- Callout Name:
  9G479

TURBO INLET PIPE
F4TZ-6K854-F
Adaptor
(2) RH & LH flange; (does not come with pipe)
Fit Note:
8 Cyl 7.3L
Require Quantity:
2
Package Quantity:
1
Base Number:
6K854
Callout Name:
6K854
MSRP: $82.00
$37.52
1
Add To Cart
F4TZ-6K854-C
Adaptor
(4) Seal; RH & LH; Attaches exhaust pipe to turbo Y connector
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  2
- Package Quantity:
  1
- Base Number:
  6K854
- Callout Name:
  6K854
MSRP: $27.00
$15.39
1
Add To Cart
F4TZ-6K854-D
Adaptor
(6) Turbo Y connector, Rectangular 4 bolt connection
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6K854
- Callout Name:
  6K854
MSRP: $315.00
$213.57
1
Add To Cart
F4TZ-6K854-A
Pipe Assy
(3) LH exhaust pipe; manifold to turbo inlet Y adaptor
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6K854
- Callout Name:
  6K854
MSRP: $193.33
$127.60
1
Add To Cart
F6TZ-6K854-A
Adaptor
(5) RH Pipe; manifold to turbo Y connector
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6K854
- Callout Name:
  6K854
MSRP: $150.20
$68.71
1
Add To Cart

TURBO (INTAKE HOSE)
F4TZ-6C640-A
Connection - Air Inlet
Cyl. head inlet to turbo air Y adaptor.
Fit Note:
8 Cyl 7.3L
Require Quantity:
2
Package Quantity:
1
Callout Name:
6C640
Replaced By:
F6TZ-6C640-A
MSRP: $73.20
$41.72
1
Add To Cart
F6TZ-6C640-A
Connection - Air Inlet
Cyl. head inlet to turbo air Y adaptor.
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  2
- Package Quantity:
  1
- Base Number:
  6C640
- Callout Name:
  6C640
MSRP: $73.20
$41.72
1
Add To Cart

F4TZ-6N632-A
FLANGE (ENGINE CHARGE EXHAUST)
Flange - Exhaust Pipe
RH & LH; Attaches exhaust pipe to turbo Y connector; 2 3/4" bolt pattern
- Location:
  Passenger Side & Driver Side
- Fit Note:
  8 Cyl 7.3L
- Require Quantity:
  2
- Package Quantity:
  1
- Base Number:
  6N632
- Callout Name:
  6N632
MSRP: $62.60
$35.68
1
Add To Cart

F4TZ-6VK682-CARM
TURBO-CHARGER ASY.
Kit - Remanufactured Turbocharger
Motorcraft reman version
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6K682
- Callout Name:
  6K682
MSRP: $1290.07
$872.17

-1822779-C91
HARDWARE
Bolt
- Base Number:
  1822779-C91
- Callout Name:
  1822779-C91
MSRP: --
$13.73
1
Add To Cart

-1831334-C91
HARDWARE
Bolt
- Callout Name:
  1831334-C91
- Replaced By:
  2C3Z-9T514-AA
MSRP: $62.83
$42.98
1
Add To Cart

2C3Z-9P466-BA
SEAL KIT (ENGINE EXHAUST BACK PRESSURE)
Kit - "O" Ring
Used to repair turbo pedestal 6N639, 7.3L, BEFORE 1/12/1998
- Callout Name:
  9P466
- Replaced By:
  2C3Z-9P466-BC
MSRP: $328.33
$222.61
1
Add To Cart

F4TZ-9C623-B
DUCT (ENGINE AIR CLEANER TO ENGINE)
Hose - Air Inlet
- Fit Note:
  8 Cyl 7.3L
- Callout Name:
  9C623
- Replaced By:
  F7UZ-9C681-AA
MSRP: $170.00
$116.28
1
Add To Cart

F5TZ-6C673-A
SOLENOID KIT (BACK PRESSURE SOLENOID)
Solenoid Assy
EBP solenoid mounted on base of turbo w/ wire leads
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6C673
- Callout Name:
  6C673
MSRP: $543.33
$453.79
1
Add To Cart

F5TZ-6N696-AA
TUBE ASY. (TURBO CHARGE TO INTAKE MANIFOLD)
Tube Assy
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6N696
- Callout Name:
  6N696
MSRP: $593.33
$402.28
1
Add To Cart

F4TZ-6VN639-AARM
TURBO PEDESTAL
Kit - Remanufactured Turbo Pedestal
With EBP; (Cold Weather package) Motorcraft Reman version
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  6N639
- Callout Name:
  6N639

F5TZ-9G486-AA
TURBINE HOUSING BOLT KIT (TURBO TO PEDESTAL)
Bolt
Consists of (8)turbo to pedestal bolts, (11)turbo housing attachment bolts, DI Turbo, BEFORE 1/12/98
- Fit Note:
  8 Cyl 7.3L
- Base Number:
  9G486
- Callout Name:
  9G486

F5UZ-9G478-A
SHIELD (TURBO HEAT)
Shield
Note: Mounting bracket is 9G479. mtg. Bolt(2) 1817956-C1., DI Turbo, BEFORE 12/7/98
- Base Number:
  9G478
- Callout Name:
  9G478

Genuine Ford Parts, the Right Choice

FordPartsGiant.com offers the wholesale prices for genuine 1996 Ford E-350/E-350 Super Duty parts. Parts like Turbocharger, Piping & Heat Shields & Related Parts are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 8 Cyl 7.3L Diesel Turbocharged. Transmission: 3AT C6.