Air Conditioning Compressor Installation fit your 1988 Ford Ranger 4 Cyl 2.3L 5-Speed Manual Transmission

3/8" garter spring-also refer to TSB 87-3, dated 2/11/87, article 87-3-9

(AI-110-D) push connect-female- straight-5/16"-connector assy. 7.9 tube x 6.3 hole push connect , STANDARD PART

(A1-110-EA) push connect-female- straight-3/8" x 5/16"-connector assy. 9.5 tube x 6.4 hose , STANDARD PART

(AR-51) retainer-3/8" tube push connect , STANDARD PART

1/2" garter spring-also refer to TSB 87-3, dated 2/11/87, article 87-3-9

(AR-51-C) retainer-6.35 push connect (duck bill) , STANDARD PART

(AI-114-C) spring lock coupling-male- 3/8"-connector body 1/4" hose x 3/8" push connect , STANDARD PART

1/4" nylon tubing-25 ft. roll

(AI-114-E) push connect-male- 5/16"-connector 8.0 tube x 7.0 hose push connect , STANDARD PART

(AI-112-E) push connect-female- 90DEG. elbow-5/16"-assy. 7.94 tube x 6.35 hose , STANDARD PART

Spring lock coupling-female- 3/8"-sleeve 1/4" hose x 3/8" push connect, , STANDARD PART

Spring lock coupling-female- 1/2"-sleeve 1/4" hose x 1/2" push connect , STANDARD PART

(AI-114-D) spring lock coupling-male- 1/2"-connector body 1/4" hose x 1/2" push connect , STANDARD PART

3/8" straight-push connector w/18" nylon tubing attached

3/8" 90DEG. elbow-push connector w/18" nylon tubing attached

(JB-276-CA)

Alternator - with A/C without P/S , ALTERNATOR CID:122 (2.0L) and 140 (2.3L) *JK6-454 27/32" x 45 1/2
Alternator - without A/C & P/S , ALTERNATOR CID:122 (2.0L) and 140 (2.3L) *JK6-454 27/32" x 45 1/2"

(JK6-400)
A/C - exc. dlr. installed , COMP AIR PUMP CID:122 (2.0L) and 140 (2.3L) *JK6-400 27/32" x 40"

(JK6-656)

(JK6-1004)

(JK6-942-A)

(JK6-940)

(JK6-910)

(JB-521)
Alternator - with T/E , ALTERNATOR CID:171 (2.9L) *JB-521 3/8" x 52 5/32"

(JC-654)

(JB-414-L)
(JB-420)

(JC-552-L)
(JC-554)

(JC-604-L)

(JB-412)

(JK6-502)

(JC-465)

(JC-564)

(JB-422-L)
(JB-423)

(JB-436-L)

(JC-453-A)

(JK6-902)

(JK6-916-A)

(JK6-950)

(JK6-990)

(Core holes in block and cyl. head)-Std. 1.50" O.D.
(Core holes in block or hd.)-1 1/2" O.D.
(Core holes in block or in head) - 1.50" O.D.
Block and cyl. hd.-standard-1 1/2" dia.
Std. 1.50" O.D.

(P-15) (used to plug oil gallery in block) 1/4"-18 r/b F1ZZ 6026-B , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (drain holes in block and oil gallery)- pipe-hex. countersunk-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (oil gallery and drain holes)-pipe-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (water drain holes and front oil gallery in block)-pipe-1/4"-18 x 27/64" , STANDARD PART
r/b F1ZZ 6026-B (P-15-)-plug (water jacket, air brake compressor oil hole in block, front and rear main oil gallery)- pipe-1/4"-18 , STANDARD PART

(PP-48-A)-plug (clean out holes in block)- 3/4-16 pipe-also used in intake manifold , STANDARD PART
(PP-48-A)-plug (clean out holes in cyl. head)-pipe- 3/4"-14 , STANDARD PART
(PP-48-A)-plug (core holes in top of cyl. head)- pipe-3/4"-14 , STANDARD PART
r/b F2ZZ 6026-A (PP-48-A)-plug (clean out holes in hd.)-hex. countersunk hd.-3/4" , STANDARD PART

(AA-5) Plug-ball type (oil gallery holes in rear of block above and below cam holes) , STANDARD PART

(Clean out holes in block)-standard 1 5/8"

Plug hole in cyl. front cover

(PP-67-A)-plug (air brake compressor oil return hole in block)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (cyl. block oil passage)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (front main oil gallery)-cup type-1/2" , STANDARD PART

(AP-10-G) Plug (drain holes in block) 1/8"-27 , STANDARD PART

.060" O/S

(Holes in cyl. head and block)-standard 2.078" O.D.
(Holes in rear of block)-Standard 2.078" O.D.-cup

.060" O/S

(OIL GALLERY IN BLOCK)-5/16"-18

(Distributor oil access hole in block)-standard .259" O.D.

FEMALE "O" RING - 90DEG. ELBOW THREAD:7/8-14 HOSE ID:5/8 SIZE A-2 13/16;B-1 1/2;C-5/8

SPLICER - STRAIGHT - RUBBER HOSE HOSE ID:1/2 SIZE A-3 7/16;C-1/2

CLAMP - NYLON HOSE HOSE ID:1/2 & 5/8 SIZE A-3/8 to 25/32;B-9/16;C-5/16

*YF-991 1/2 inch

*YF-1134 5/8 inch

A/C (dealer installed)

Coil