Genuine Ford Explorer Trailer Towing

Select your vehicle for the best product fit

Select by Model Change Vehicle

-- Select Make --

-- Select Model --

-- Select Year --

19 Genuine Ford Explorer Trailer Towings found

Ford Explorer Trailer Towing - 4 Pin Connector
Part Number: BB5Z-15A416-A
Other Name: Kit - Tow Bar Electrics; Wire Harness
4 Pin Connector
$44.84 MSRP: $70.00
You Save: $25.16 (36%)
More Info
Fits the following Ford Models
2011-2019 Ford Explorer
This 4-pin wiring harness assembly is made to plug into the factory electrical system.
The 4-pin design does not allow the use of trailers with electric brakes.
Dealer installation recommended.
Less Info
Ford Explorer Trailer Towing - 4 Pin
Part Number: FT1Z-15A416-A
Other Name: Kit - Tow Bar Electrics; Wire HarnessReplaces: DT4Z-15A416-A, 7T4Z-15A416-B
4 Pin
$116.57 MSRP: $130.00
You Save: $13.43 (11%)
More Info
Fits the following Ford Models
2020-2023 Ford Explorer
Note: Not For Use With SportEdge: Not For Use With Edge Sport or Hands Free Tailgate.
The 4-pin wiring harness assembly splices/connects to the factory electrical system.
Less Info
Ford Explorer Trailer Hitch - Class I
Part Number: BB5Z-19D520-AA
Other Name: Kit - Tow Bracket
$268.94 MSRP: $340.00
You Save: $71.06 (21%)
More Info
Fits the following Ford Models
2011-2015 Ford Explorer
Original equipment hitch bolts directly into existing holes – no drilling or welding required.
NOTE: Towing capacity could be limited by vehicle powertrain.
See your dealer or Owners Guide for details.
Less Info
Ford Explorer Trailer Hitch
Part Number: GB5Z-19D520-A
Other Name: Kit - Tow BracketReplaced by: GB5Z-19D520-C
$280.81 MSRP: $355.00
You Save: $74.19 (21%)
More Info
Fits the following Ford Models
2016-2017 Ford Explorer
For use with unique rear fascia from Ford Accessories.
Trailer hitch drawbar, ball and wiring harness sold separately.
Towing capacity is dependent on vehicle powertrain
Module required if vehicle is equipped with Hands-Free Foot Activate Liftgate.(1
Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
Constructed of tubular steel crossmembers and high-strength steel brackets.
Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
Includes hitch, plus mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Trailer Towing - 2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. Hole
Part Number: BL3Z-19A282-A
Other Name: Kit - Tow Bracket; Bracket, Mount, Mount Arm, Mount Kit, ReceiverReplaces: F5TZ-19A282-A, F5TZ-19A282-C
2 1/4 Inch Rise x 4 Inch Drop x 1 Inch Dia. Hole
$22.42 MSRP: $35.00
You Save: $12.58 (36%)
More Info
Fits the following Ford Models
2007-2023 Ford Explorer
Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Ownerâ€™s Manual for details.
This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
Solid 2” shank, 9” length with 2-1/4” rise, 4” drop
1” diameter ball hole • 6,000 lb. capacity
Corrosion-resistant black powdercoat finish
Less Info
Ford Explorer Trailer Towing - 2 Inch Drop
Part Number: BL3Z-19A282-B
Other Name: Kit - Tow BracketReplaces: F5TZ-19A282-D, F5TZ-19A282-B
2 Inch Drop
$31.39 MSRP: $35.00
You Save: $3.61 (11%)
More Info
Fits the following Ford Models
2007-2023 Ford Explorer
Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
This ball mount fits 2” square receivers and is rated for up to 6,000 lb. GTW/600 lb. TW.
Solid 2” shank, 8-1/2” length with 3/4” rise, 2” drop
1” diameter ball hole
6,000 lb. capacity
Corrosion-resistant black powdercoat finish
Less Info
Ford Explorer Trailer Towing - 3.5K
Part Number: BL8Z-19A282-A
Other Name: Kit - Tow Bracket; Hitch Plate, ReceiverReplaces: 1L2Z-19A282-AA
3.5K
$23.94 MSRP: $30.00
You Save: $6.06 (21%)
More Info
Fits the following Ford Models
2008-2010 Ford Explorer
For Vehicles with 1 1/4 Inch Receiver Hitch.
Class II 1 1/4 Inch 7 3/16 Inch long 2 5/8 Inch Rise 3 1/4 Drop 1 Inch Hole
Less Info
Ford Explorer Trailer Towing - Stainless Steel, 2" Ball, 1" Shank
Part Number: BL3Z-19F503-B
Other Name: Kit - Tow BracketReplaces: F5TZ-19F503-E
Stainless Steel, 2" Ball, 1" Shank
$22.42 MSRP: $35.00
You Save: $12.58 (36%)
More Info
Fits the following Ford Models
2007-2023 Ford Explorer
Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.
This heavy-duty hitch ball is for towing applications up to 6,000 lbs. GTWR
2” ball, 1” shank diameter, 2-1/8” shank length
Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
6,000 lb. capacity
Less Info
Ford Explorer Trailer Towing - Stainless Steel, 1 7/8 Ball, 1 Inch Shank
Part Number: BL3Z-19F503-C
Other Name: Kit - Tow Bracket; Ball Stud, Bracket Ball Stud, Hitch Ball
Stainless Steel, 1 7/8 Ball, 1 Inch Shank
$19.22 MSRP: $30.00
You Save: $10.78 (36%)
More Info
Fits the following Ford Models
2007-2023 Ford Explorer
Vehicle powertrain, suspension and other equipment all contribute to towing capacity. Please check your vehicle Owner’s Manual for details.Ranger: Not Compatible With Light Duty Trailer Hitch
This light-duty hitch ball is for towing applications up to 2,000 lbs.GTWR
1-7/8” ball, 1” shank diameter, 2-1/8” shank length
Features forged stainless-steel one-piece construction for maximum strength and corrosion resistance
2,000 lb. capacity
Less Info
Ford Explorer Trailer Towing
Part Number: VLL3Z-19A282-A
$39.10 MSRP: $49.00
You Save: $9.90 (21%)
More Info
Fits the following Ford Models
2020-2023 Ford Explorer
The CURT™ D-ring shackle mount is perfect for vehicle recovery or tough jobs off-road and out in the field. It is built with a removable, heavy-duty D-ring shackle, a solid steel shank and a highly durable powder coat finish.
Fits trailer hitches with a 2" x 2" receiver tube opening
Can be used with most vehicle recovery straps
Shank constructed from solid steel for optimum strength
Protected by a highly durable carbide powder coat finish
Less Info
Ford Explorer Trailer Hitch
Part Number: GB5Z-19D520-C
Other Name: Kit - Tow BracketReplaces: GB5Z-19D520-B, GB5Z-19D520-A
$280.81 MSRP: $355.00
You Save: $74.19 (21%)
More Info
Fits the following Ford Models
2017 Ford Explorer
Module Replacement Required if vehicle is equipped with Hands-Free Foot Activated Liftgate.
Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
Constructed of tubular steel crossmembers and high-strength steel brackets.
Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
Includes hitch, bezel and mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Fascia - Rear Lower, Sterling Silver, For Platinum Edition
Part Number: GB5Z-17K835-EA
Other Name: Cover
More Info
Fits the following Ford Models
2016-2017 Ford Explorer
For vehicles without Class II or Class III Trailer Tow Packages.
Recommended when installing a Ford accessory trailer hitch.
Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that is expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
Finished with a durable Sterling Silver clearcoat.
Includes lower fascia, hitch cover, installation sheet and mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Trailer Towing
Part Number: JB5Z-19D520-AA
Other Name: Kit - Trailer Hitch Bar; Trailer Hitch
$276.85 MSRP: $350.00
You Save: $73.15 (21%)
More Info
Fits the following Ford Models
2018-2019 Ford Explorer
Module Replacement Required if vehicle is equipped with Hands-Free Foot Activated Liftgate.Towing capacity could be limited by vehicle powertrain. See your dealer or Owners Guide for details..
Take your adventure quotient to the next level: Equip your Explorer with this rugged receiver that bolts directly to the rear frame and provides the capability to tow a boat, camper or trailer.
Constructed of tubular steel crossmembers and high-strength steel brackets.
Finished with a durable E-coat and black powder topcoat for maximum corrosion resistance.
Dimensions – approximately 17.5" long, 51.1" wide, 10.0" high.
Includes hitch, bezel and mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Neutral Tow Kit
Part Number: 1L2Z-7H332-AB
Other Name: Kit
More Info
Fits the following Ford Models
2007-2010 Ford Explorer
Not available for AWD vehicles.
Use this rugged kit to tow your Explorer or Sport Trac behind your motorhome. It's designed to keep all four wheels on the ground for greater stability.
Available for 2001-2005 Explorer 4.6L V8, 2001-2010 Explorer 4.0L V6or 2007-2010 Explorer Sport Trac 4.0L V6, 4WD and an automatic transmission.
Dealer installation recommended.
Less Info
Ford Explorer Neutral Tow Kit
Part Number: 6L2Z-7H332-A
Other Name: Kit
More Info
Fits the following Ford Models
2007-2010 Ford Explorer
Not available for AWD vehicles.
Use this rugged kit to tow your SUV behind your motorhome. It's designed to keep all 4 wheels on the ground for greater stability.
Available for 2006-2010 Explorer 4.6L V8 or 2007-2010 Sport Trac 4.6LV* equipped with 4WD and automatic transmission
Dealer installation is recommended
Less Info
Ford Explorer Fascia - Rear Lower, Magnetic, For XLT
Part Number: GB5Z-17K835-BB
Other Name: Cover
More Info
Fits the following Ford Models
2017 Ford Explorer
Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that is expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
Finished with a durable Sterling Silver clearcoat.
Includes lower fascia, hitch cover, installation sheet and mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Fascia - Rear, Carbon Black, For Base Model
Part Number: GB5Z-17K835-AA
Other Name: Cover
More Info
Fits the following Ford Models
2016-2017 Ford Explorer
Recommended when installing a Ford accessory trailer hitch.
For vehicles without Class II or Class III Trailer Tow Packages. .
Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
Finished with a durable Carbon Black clearcoat.
Includes fascia, plus mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Fascia - Rear Lower, Silver Lining, For XLT/Limited
Part Number: GB5Z-17K835-BA
Other Name: Cover
More Info
Fits the following Ford Models
2016-2017 Ford Explorer
For vehicles without Class II or Class III Trailer Tow Packages.
Recommended when installing a Ford accessory trailer hitch.
Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
Finished with a durable Silver Lining clearcoat.
Includes lower fascia, hitch cover, installation sheet and mounting hardware.
Dealer installation recommended.
Less Info
Ford Explorer Fascia - Rear Lower, Absolute Black, For Sport Edition
Part Number: GB5Z-17K835-DA
Other Name: Cover
More Info
Fits the following Ford Models
2016-2017 Ford Explorer
Recommended when installing a Ford accessory trailer hitch.
Subtly distinguish the back of your Explorer with this pre-painted lower fascia section that's expertly engineered to accommodate the Ford Accessories trailer hitch for additional versatility.
For use when adding a Ford accessory trailer hitch to your Explorer, expertly engineered to conceal the Ford Accessories trailer hitch for a clean finished appearance.
Constructed of reinforced, injection-molded, thermoformed plastic for strength and structural rigidity.
Finished with a durable Absolute Black clearcoat.
Includes fascia, plus mounting hardware.
Dealer installation recommended.
Less Info

Related Ford Explorer Accessories