Customer Service - Live ChatLive Chat

0 Item(s) $0.00
My Vehicles (0)
Narrow Your Results
You have selectedChange Vehicle
1982 Ford Mustang
 
Using VIN for most accurate result, in some cases the only way to get the parts that fit.
Categories
  • Accelerator Linkage, Air Cleaner & Speed Control
        • Air Conditioner, Radios & Shock Absorbers
              • Alternator, Regulator, Battery, Starter & Distributor
                    • Automatic Transmission
                          • Body Front & Floor
                                • Body Sides & Quarter
                                      • EM Exterior Moulding
                                            • Engine
                                                  • Fenders & Hood
                                                        • Frame, Exhaust System, Spring & Stabilizer
                                                              • Front Suspension & Steering
                                                                    • Fuel System & Manifolds
                                                                          • IT Interior Trim Parts
                                                                                • Lamps & Wiring
                                                                                      • Manual Transmission
                                                                                            • Radiator & Grill
                                                                                                  • Rear Axle & Drive Shaft
                                                                                                        • Roof, Back, Luggage Compartment & Tailgate
                                                                                                              • Seats
                                                                                                                    • SM Body Sheet metal
                                                                                                                          • Speedometer, Bumpers, Mirrors & Wipers
                                                                                                                                • Wheels & Brakes

                                                                                                                                      Parts found for 1982 Ford Mustang > Manual Transmission > 1980s > INTERNAL PARTS 4 speed manual trans. - German design

                                                                                                                                      Part No. Description Fitting Vehicle
                                                                                                                                           Options
                                                                                                                                      Req
                                                                                                                                      Qty.
                                                                                                                                      Retail
                                                                                                                                      Price
                                                                                                                                      Your
                                                                                                                                      Price
                                                                                                                                      Qty.    Cart
                                                                                                                                      Collapse 1ST & 2ND SPEED SYNCHRONIZER RETAINING SNAP RING - Callout Name: 7064
                                                                                                                                      E0ZZ-7064-H

                                                                                                                                      1ST & 2ND SPEED SYNCHRONIZER RETAINING SNAP RING

                                                                                                                                      1st. & 2nd. syn. (7124) to shaft 1 1/2'' I.D. x 1/16'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse 1st and 2nd speed FORK (GEAR SHIFTER) - Callout Name: 7230
                                                                                                                                      E1ZZ-7230-A

                                                                                                                                      1st and 2nd speed FORK (GEAR SHIFTER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse 2ND SPEED GEAR RETAINING SNAP RING - Callout Name: 7064
                                                                                                                                      E0ZZ-7064-G

                                                                                                                                      2ND SPEED GEAR RETAINING SNAP RING

                                                                                                                                      Second speed gr. (7102) to shaft - 1 1/4'' I.D. x 3/32'' thick - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse 2nd SPEED GEAR RETAINING-ALSO REFER TO GROUP 7059 SNAP RING - Callout Name: 7064
                                                                                                                                      D1FZ-7064-A

                                                                                                                                      2nd SPEED GEAR RETAINING-ALSO REFER TO GROUP 7059 SNAP RING

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-B

                                                                                                                                      2nd SPEED GEAR RETAINING-ALSO REFER TO GROUP 7059 SNAP RING

                                                                                                                                      Inner - 1-1/4'' I.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse 3rd and 4th speed FORK (GEAR SHIFTER) - Callout Name: 7230
                                                                                                                                      D1FZ-7230-D

                                                                                                                                      3rd and 4th speed FORK (GEAR SHIFTER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse ARM and SUPPORT ASSY. (TRANSMISSION SELECTOR LEVER) - Callout Name: 7302
                                                                                                                                      D9BZ-7302-A

                                                                                                                                      ARM and SUPPORT ASSY. (TRANSMISSION SELECTOR LEVER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse ARM ASSY. (CONTROL SELECTOR) - Callout Name: 7302
                                                                                                                                      -67557-S

                                                                                                                                      ARM ASSY. (CONTROL SELECTOR)

                                                                                                                                      (N-101-E) Pin (arm to shaft) 3/16'' x 3/4''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1TZ-7302-A

                                                                                                                                      ARM ASSY. (CONTROL SELECTOR)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse ARM ASSY. (GEAR SHIFT SELECTOR) - Callout Name: 7302
                                                                                                                                      -357479-S5

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      (NN108) Pin-3/16" dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D3FZ-7302-A

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7302-A

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      Replaced by: F7ZZ-7302-AA

                                                                                                                                      1 $76.35 $54.06
                                                                                                                                      E1DZ-7302-A

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      Use w/retaining pin type shift cable, Before 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E2DZ-7302-A

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      Use w/snap on type shift cable, From 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E646569-S

                                                                                                                                      ARM ASSY. (GEAR SHIFT SELECTOR)

                                                                                                                                      (AN-5-E)-Pin (att. 7302 & 7358)-M4 x 20 (Metric)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BEARING - Also refer to group 7065 - Callout Name: 7025
                                                                                                                                      E1ZZ-7025-A

                                                                                                                                      BEARING - Also refer to group 7065

                                                                                                                                      Input shaft - 1-3/4'' I.D. x 3-3/8'' O.D. x 7/8'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BEARING - Callout Name: 7025
                                                                                                                                      C3AZ-7025-B

                                                                                                                                      Bearing

                                                                                                                                      Input or output shaft

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse BEARING (CLUTCH PILOT) - Callout Name: 7600
                                                                                                                                      D4DZ-7600-A

                                                                                                                                      Sleeve

                                                                                                                                      43/64'' I.D. X 1 3/8'' O.D.

                                                                                                                                      1 $24.03 $17.02
                                                                                                                                      D4ZZ-7600-A

                                                                                                                                      Sleeve

                                                                                                                                      13/16'' O.D.

                                                                                                                                      1 $15.60 $11.04
                                                                                                                                      Collapse BEARING (COUNTERSHAFT GEAR) - Callout Name: 7121
                                                                                                                                      E5ZZ-7121-A

                                                                                                                                      BEARING (COUNTERSHAFT GEAR)

                                                                                                                                      1/8'' dia. x 1'' long - tapered needle (set consists of 21)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      E5RY-7121-A

                                                                                                                                      Roller - Bearing

                                                                                                                                      1/8'' dia. x 3/4'' long - tapered needle (set consists of 21)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse BEARING (INPUT SHAFT PILOT) - Also refer to group 7600 - Callout Name: 7120
                                                                                                                                      D1FZ-7120-B

                                                                                                                                      Bearing Assy - Needle

                                                                                                                                      1'' dia. x 9/16'' wide

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BEARING ASSY. (INPUT and OUTPUT SHAFT - TAPERED ROLLER)-also refer to group 7F431 - Callout Name: 7025
                                                                                                                                      E0ZZ-7025-A

                                                                                                                                      BEARING ASSY. (INPUT and OUTPUT SHAFT - TAPERED ROLLER)-also refer to group 7F431

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse BEARING ASSY. (MAIN DRIVE GEAR) - Callout Name: 7025
                                                                                                                                      D1FZ-7025-A

                                                                                                                                      BEARING ASSY. (MAIN DRIVE GEAR)

                                                                                                                                      1 3/8'' I.D. x 2 27/32'' O.D. x 11/16'' wide-9 balls

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BEARING ASSY. (OUTPUT SHAFT) - Callout Name: 7065
                                                                                                                                      D1FZ-7065-A

                                                                                                                                      BEARING ASSY. (OUTPUT SHAFT)

                                                                                                                                      2-11/16'' dia. x 45/64'' wide - 7 balls

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7065-A

                                                                                                                                      BEARING ASSY. (OUTPUT SHAFT)

                                                                                                                                      Output shaft - 1-3/8'' I.D. x 3-9/64'' O.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BEARING ASY. (CASE) - Callout Name: 7025
                                                                                                                                      EOAZ-7025-A

                                                                                                                                      Bushing

                                                                                                                                      2 9/32'' I.D. X 11/16'' WIDE

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BUSHING - Callout Name: 7341
                                                                                                                                      EOAZ-7341-B

                                                                                                                                      Insulator - Rubber

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      EOSZ-7341-B

                                                                                                                                      Insulator - Rubber

                                                                                                                                      USE IN 7A256 LEVER

                                                                                                                                      1 $4.34 $3.07
                                                                                                                                      Collapse BUSHING (CASE) - Callout Name: 7025
                                                                                                                                      C4AZ-7025-A

                                                                                                                                      Obsolescence - Policy

                                                                                                                                      1 5/16'' O.D. x 29/32'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BUSHING (EXTENSION HOUSING) - Callout Name: 7341
                                                                                                                                      D1FZ-7341-A

                                                                                                                                      BUSHING (EXTENSION HOUSING)

                                                                                                                                      3/4'' large dia. x 13/16'' long - 6 slots

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BUSHING (EXTENSION HOUSING) - Callout Name: 7A034
                                                                                                                                      B3TZ-7A034-B

                                                                                                                                      Bush

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7A034-C

                                                                                                                                      Bush

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D7FZ-7A034-A

                                                                                                                                      Bush

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BUSHING (GEARSHIFT DAMPENER) - Callout Name: 7K453
                                                                                                                                      D4ZZ-7K453-B

                                                                                                                                      BUSHING (GEARSHIFT DAMPENER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7K453-B

                                                                                                                                      BUSHING (GEARSHIFT DAMPENER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7K453-B

                                                                                                                                      BUSHING (GEARSHIFT DAMPENER)

                                                                                                                                      Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse BUSHING (GEARSHIFT SHAFT) - Callout Name: 7K453
                                                                                                                                      D2FZ-7K453-A

                                                                                                                                      Bush

                                                                                                                                      #Black

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse CASE ASSY. - Callout Name: 7005
                                                                                                                                      E1AZ-7005-A

                                                                                                                                      Case Assy - Transmission

                                                                                                                                      (Case has filler tube hole)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E3ZZ-7005-A

                                                                                                                                      Case Assy - Transmission

                                                                                                                                      Incl. (1) E850100-S71 plug & (1) E853109-S seal

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E3ZZ-7005-C

                                                                                                                                      Case Assy - Transmission

                                                                                                                                      Assy. incl. 7D171 race

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -20430-S8

                                                                                                                                      CASE ASSY.

                                                                                                                                      (B-104)-bolt (case to flywheel housing)-7/16''-14 x 1 1/4''

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -358035-S

                                                                                                                                      CASE ASSY.

                                                                                                                                      (PP-31) plug (case filler) square head-1/2'' pipe

                                                                                                                                      View More

                                                                                                                                      (PP-31)-plug (case filler)-squared head-1/2'' pipe

                                                                                                                                      (PP-31)-plug-1/2''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -384524-S100

                                                                                                                                      CASE ASSY.

                                                                                                                                      Screw & washer assy. (trans. case to flywheel housing)- 7/16'' x 13'' x 1 1/4''-hex. head

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -384751-S

                                                                                                                                      CASE ASSY.

                                                                                                                                      (BB-266-U)-bolt (to fill retarded spark hole in case)-5/8''-18 x 3/8''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -74112-S

                                                                                                                                      CASE ASSY.

                                                                                                                                      (P-1-A)-plug (to seal shift rail hole in case)- 11/16'' expansion

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D9BZ-7005-A

                                                                                                                                      CASE ASSY.

                                                                                                                                      #D9BR 7006-AA or AB

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7005-A

                                                                                                                                      CASE ASSY.

                                                                                                                                      #RF-E0ZR 7006-AB

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7005-A

                                                                                                                                      CASE ASSY.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N800016-S51

                                                                                                                                      CASE ASSY.

                                                                                                                                      (AP-13)-plug (threaded hole in case)- M18 x 1.5 x 9.9 (Metric fine)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N801114-S51

                                                                                                                                      CASE ASSY.

                                                                                                                                      (AB-160-J) bolt (case to flywheel hsg.)- M12 x 1.5 x 40 (Metric)

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -E450102-S80

                                                                                                                                      Plug

                                                                                                                                      (AP-10-G)-plug (case)-1/8-27 (Metric)

                                                                                                                                      2 $1.64 $0.97
                                                                                                                                      -87650-S

                                                                                                                                      Plug - Blanking - Threaded

                                                                                                                                      (P-12) plug dry seal 1/8'' - 27

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E450100-S76

                                                                                                                                      Plug - Threaded

                                                                                                                                      (AP-15)-plug (use as filler plug)-1/2'' x 1/4''

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -34793-S2

                                                                                                                                      Washer

                                                                                                                                      (X-67-A)-lockwasher-7/16''

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      Collapse CASE ASY. - Callout Name: 7005
                                                                                                                                      -N606063-S427

                                                                                                                                      Bolt

                                                                                                                                      (AB-111-E) BOLT (CASE TO ENG.) M10 - 1.50 X .55 (METRIC)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E9AZ-7005-A

                                                                                                                                      Case Assy - Transmission

                                                                                                                                      REFER TO TSB 83-12-8

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -87650-S

                                                                                                                                      Plug - Blanking - Threaded

                                                                                                                                      (P-12)-PLUG (REQD. TO PLUG FRONT PUMP, DIRECT CL., FORWARD. & THROTTLE VALVE-PRESSURE HOLES IN CASE-DRY SEAL-1/8''-27

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      -57664-S2

                                                                                                                                      Screw And Washer Assy

                                                                                                                                      (B-111-D) BOLT (CASE TO ENG.) - 7/16'' - 14 X 2 1/4''

                                                                                                                                      6 -- -- Discontinued
                                                                                                                                      Collapse Countershaft - Callout Name: 7111
                                                                                                                                      -305080-S

                                                                                                                                      Countershaft

                                                                                                                                      (NN-113) Pin - spring - 1/4'' x 1''

                                                                                                                                      View More

                                                                                                                                      (NN-113) Pin (retain shaft in case) - 1/4'' x 1''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C4AZ-7111-A

                                                                                                                                      Countershaft

                                                                                                                                      7/8'' dia. - 10-1/8'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D2RY-7111-A

                                                                                                                                      Countershaft

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7111-A

                                                                                                                                      Countershaft

                                                                                                                                      7/8'' O.D. x 9-1/8'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -119686-ES18

                                                                                                                                      Spacer - Washer

                                                                                                                                      (AX-15) Flatwasher (to retain 7121 in 7113) M17.6 (Metric) for 1984/1986 appl. use D2RY 7125-A

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse COVER (CASE ACCESS) - Callout Name: 7222
                                                                                                                                      C4AZ-7222-A

                                                                                                                                      Cover

                                                                                                                                      9'' x 6 1/2''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -384658-S

                                                                                                                                      COVER (CASE ACCESS)

                                                                                                                                      (BB-543-H) Bolt (cover to case) 5/16'' - 18 x 5/8''

                                                                                                                                      8 -- -- Discontinued
                                                                                                                                      -384659-S

                                                                                                                                      COVER (CASE ACCESS)

                                                                                                                                      (BB-575-D) Screw (cover to case) 5/16'' - 18 x 1''

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse COVER (CASE) - Callout Name: 7222
                                                                                                                                      -E602167-S71

                                                                                                                                      Bolt - Hex.Head

                                                                                                                                      (AB-7)-screw-hex.hd.-M6 x 20 (Metric coarse)

                                                                                                                                      8 -- -- Discontinued
                                                                                                                                      D5FZ-7222-A

                                                                                                                                      COVER (CASE)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9ZZ-7222-A

                                                                                                                                      COVER (CASE)

                                                                                                                                      #D9ZR 7222-AA - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7222-A

                                                                                                                                      COVER (CASE)

                                                                                                                                      Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E800197-S72

                                                                                                                                      COVER (CASE)

                                                                                                                                      (AB-151-A) Bolt (cover to case)-hex. hd. M6 x 12 (Metric)

                                                                                                                                      View More

                                                                                                                                      (AB-151-A)-Bolt (cover to case) - hex hd. M6 x 12 (Metric coarse)

                                                                                                                                      10 -- -- Discontinued
                                                                                                                                      -87038-S91

                                                                                                                                      Hardware - Miscellaneous

                                                                                                                                      (T-1-DA)-"O" ring shifter shaft-13/16'' I.D.

                                                                                                                                      1 $14.06 $8.30
                                                                                                                                      -74113-S

                                                                                                                                      Plug

                                                                                                                                      (P-2)-plug-3/4''

                                                                                                                                      1 $3.04 $1.79
                                                                                                                                      Collapse FORK (GEAR SHIFTER) - Callout Name: 7230
                                                                                                                                      D8ZZ-7230-A

                                                                                                                                      Fork - Gear Shift

                                                                                                                                      1st. & 2nd.-all trans.-incl. (2) D8ZZ-7L082-A inserts

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7230-B

                                                                                                                                      Fork - Gear Shift

                                                                                                                                      3rd & 4th speed, From 6/13/81

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D6ZZ-7230-A

                                                                                                                                      FORK (GEAR SHIFTER)

                                                                                                                                      3rd. & 4th.-all trans.-incl. (2) D6ZZ-7L082-A or (2) D8ZZ-7L082-A inserts

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7230-A

                                                                                                                                      FORK (GEAR SHIFTER)

                                                                                                                                      1st & 2nd speed #RF-E0ZR-7C114-AC

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7230-B

                                                                                                                                      FORK (GEAR SHIFTER)

                                                                                                                                      3rd & 4th speed #RF E0ZR-7230-AC

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1TZ-7230-A

                                                                                                                                      FORK (GEAR SHIFTER)

                                                                                                                                      #E1TR 7C114-AB-1st & 2nd speed-one piece design fork-7N232 plate not reqd.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E3ZZ-7230-A

                                                                                                                                      FORK (GEAR SHIFTER)

                                                                                                                                      5th. speed

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse FORK (REVERSE GEAR SHIFT) - Callout Name: 7231
                                                                                                                                      D4FZ-7231-A

                                                                                                                                      Fork - Gear Shift

                                                                                                                                      Reverse

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E2ZZ-7231-A

                                                                                                                                      Fork - Gear Shift

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7231-A

                                                                                                                                      FORK (REVERSE GEAR SHIFT)

                                                                                                                                      Reverse

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7231-A

                                                                                                                                      FORK (REVERSE GEAR SHIFT)

                                                                                                                                      #D9BR 7231 BA-reverse

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GASKET (CASE ACCESS COVER) - Callout Name: 7223
                                                                                                                                      C4AZ-7223-C

                                                                                                                                      Gasket

                                                                                                                                      12 holes on gasket

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GASKET (CASE COVER) - Callout Name: 7223
                                                                                                                                      D1FZ-7223-A

                                                                                                                                      GASKET (CASE COVER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7223-A

                                                                                                                                      GASKET (CASE COVER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7223-A

                                                                                                                                      GASKET (CASE COVER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GASKET (EXTENSION HOUSING) - Callout Name: 7086
                                                                                                                                      D4ZZ-7086-B

                                                                                                                                      Gasket

                                                                                                                                      1 $4.53 $3.21
                                                                                                                                      F7AZ-7086-A

                                                                                                                                      Gasket

                                                                                                                                      1 $4.33 $3.07
                                                                                                                                      C4AZ-7086-C

                                                                                                                                      GASKET (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4FZ-7086-A

                                                                                                                                      GASKET (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7086-A

                                                                                                                                      GASKET (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0BZ-7086-A

                                                                                                                                      GASKET (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7086-A

                                                                                                                                      GASKET (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GASKET (INPUT SHAFT BEARING RETAINER) - Callout Name: 7051
                                                                                                                                      C4AZ-7051-A

                                                                                                                                      Gasket

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C2AZ-7051-B

                                                                                                                                      GASKET (INPUT SHAFT BEARING RETAINER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR (COUNTERSHAFT CLUSTER) - Callout Name: 7113
                                                                                                                                      D5ZZ-7113-A

                                                                                                                                      GEAR (COUNTERSHAFT CLUSTER)

                                                                                                                                      37-29-23-15-15-teeth - 7-15/16'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D7FZ-7113-A

                                                                                                                                      GEAR (COUNTERSHAFT CLUSTER)

                                                                                                                                      #77ET 7113-AA 35-29-24-16-15 teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7113-B

                                                                                                                                      GEAR (COUNTERSHAFT CLUSTER)

                                                                                                                                      36-41-26-15 teeth - 8-7/8'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7113-B

                                                                                                                                      GEAR (COUNTERSHAFT CLUSTER)

                                                                                                                                      use w/RAP-AB,AG,AH,AM,AP,AR trans.-33-27- 21-15-14 teeth, refer also to TSB 83-2-5

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR (FIRST SPEED) - Callout Name: 7100
                                                                                                                                      D4FZ-7100-A

                                                                                                                                      GEAR (FIRST SPEED)

                                                                                                                                      30 clutch, 29 helical teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7100-A

                                                                                                                                      GEAR (FIRST SPEED)

                                                                                                                                      33 helical, 30 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7100-A

                                                                                                                                      GEAR (FIRST SPEED)

                                                                                                                                      30 helical-31 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR (SECOND SPEED) - Callout Name: 7102
                                                                                                                                      -379233-S

                                                                                                                                      GEAR (SECOND SPEED)

                                                                                                                                      Snap ring (gear to output shaft) - 1-1/2'' I.D. x 1-13/16'' O.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7102-A

                                                                                                                                      GEAR (SECOND SPEED)

                                                                                                                                      32 helical, 30 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D6RY-7102-A

                                                                                                                                      GEAR (SECOND SPEED)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7102-A

                                                                                                                                      GEAR (SECOND SPEED)

                                                                                                                                      31 helical - 36 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7102-A

                                                                                                                                      GEAR (SECOND SPEED)

                                                                                                                                      27 helical-33 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR (THIRD SPEED or OVERDRIVE) - Callout Name: 7B340
                                                                                                                                      D9BZ-7B340-B

                                                                                                                                      GEAR (THIRD SPEED or OVERDRIVE)

                                                                                                                                      20 helical-36 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR (THIRD SPEED) - Callout Name: 7B340
                                                                                                                                      D4ZZ-7B340-A

                                                                                                                                      GEAR (THIRD SPEED)

                                                                                                                                      26 helical, 27 clutch teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D7FZ-7B340-A

                                                                                                                                      GEAR (THIRD SPEED)

                                                                                                                                      27 clutch teeth - 20 helical teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E2ZZ-7B340-A

                                                                                                                                      GEAR (THIRD SPEED)

                                                                                                                                      Use w/RAP-AB,AG,AH,AM,AP,AR trans. - 23 helical teeth - see7B340 kit - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR and BUSHING ASSY. (REVERSE IDLER) - Callout Name: 7141
                                                                                                                                      E0ZZ-7141-A

                                                                                                                                      GEAR and BUSHING ASSY. (REVERSE IDLER)

                                                                                                                                      17 teeth-1 11/64'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7141-A

                                                                                                                                      GEAR and BUSHING ASSY. (REVERSE IDLER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D7DZ-7141-A

                                                                                                                                      Gear Assy - Idler

                                                                                                                                      16 teeth - 25 splines - 3-17/32'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse GEAR ASSY. (REVERSE IDLER) - Callout Name: 7141
                                                                                                                                      D4FZ-7141-A

                                                                                                                                      Gear Assy - Idler

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse HARDWARE - Callout Name: E602529-S76
                                                                                                                                      -E602529-S76

                                                                                                                                      HARDWARE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse HARDWARE - Callout Name: E646569-S
                                                                                                                                      -E646569-S

                                                                                                                                      HARDWARE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse HOUSING (EXTENSION) - Callout Name: 7A039
                                                                                                                                      E2ZZ-7A039-A

                                                                                                                                      Housing - Transmission Extension

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      EOSZ-7A039-A

                                                                                                                                      Housing - Transmission Extension

                                                                                                                                      HOUSING - 10.287'' LONG - #RF EOAP 7A040-BC,BD,CC; F2TP-AA

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -20430-S8

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (B-104)-bolt (housing to case)-7/16'' -14 x 1 1/8''

                                                                                                                                      5 -- -- Discontinued
                                                                                                                                      -379296-S

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (BB-545-K) bolt (7A039 to 7005) hex washer head-3/8''-16 x 1 3/8''

                                                                                                                                      6 -- -- Discontinued
                                                                                                                                      D8BZ-7A039-C

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7A039-A

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      #D9BR 7A040-AC

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9ZZ-7A039-A

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      #D9ZR 7A040-AA

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7A039-A

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      #RF-E0ZR 7A040-CA, Before 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E2SZ-7A039-B

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E3ZZ-7A039-A

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      #RF-E3ZR 7A040-AA-incl. (1) E2ZZ 7288-A seal, (1) E850100-S71 plug, (1) E853109-S seal- discard plug & seal when 7G072 switch is used, From 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E600312-S82

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (AB-33)-bolt (extension to case)-hex. head-M10 x 35 (Metric coarse)

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -N605788-S

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (AB-118-EJ)-BOLT (HSG.TO CASE) HEX FLANGE HEAD-M8-1.25 X 30 (METRIC)

                                                                                                                                      6 -- -- Discontinued
                                                                                                                                      -N800015-S

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (AP-13-A)-plug (to plug sensor switch hole)-hex. head-M16 x 1.5 (Metric fine)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N800038-S2

                                                                                                                                      HOUSING (EXTENSION)

                                                                                                                                      (AB-31-C) screw and washer assy. (ext. to case hex. hd.-M10 x 30 (Metric coarse)

                                                                                                                                      5 -- -- Discontinued
                                                                                                                                      -E800152-S72

                                                                                                                                      Screw

                                                                                                                                      (AB-119-F) - screw (housing to case) - hex. washer head - M10 x 30 (Metric coarse)

                                                                                                                                      6 $1.02 $0.60
                                                                                                                                      -34793-S2

                                                                                                                                      Washer

                                                                                                                                      (X-67-A)-lockwasher

                                                                                                                                      5 -- -- Discontinued
                                                                                                                                      Collapse INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING - Callout Name: 7064
                                                                                                                                      D1FZ-7064-C

                                                                                                                                      INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .087'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-D

                                                                                                                                      INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Copper - .090'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-E

                                                                                                                                      INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Blue - .092'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-F

                                                                                                                                      INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Black - .095'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-G

                                                                                                                                      INPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Brown - .098'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse INSERT (SYNCHRONIZER HUB) - Callout Name: 7A044
                                                                                                                                      D4ZZ-7A044-A

                                                                                                                                      Insert

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      D1FZ-7A044-A

                                                                                                                                      Insert - 1st And 2nd Speed Synchro.

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      C3AZ-7A044-C

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      3rd and 4th speed

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      C4AZ-7A044-B

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      1st and 2nd speed

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      D1FZ-7A044-B

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      3rd and 4th speed - 3/4'' long x 3/16'' high x 1/4'' thick

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      D4ZZ-7A044-B

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      E0ZZ-7A044-A

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      1st & 2nd speed

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      E0ZZ-7A044-B

                                                                                                                                      INSERT (SYNCHRONIZER HUB)

                                                                                                                                      3rd & 4th speed 5th speed

                                                                                                                                      3 -- -- Discontinued
                                                                                                                                      Collapse INSULATOR (TRANSMISSION CONTROL BELLCRANK or SHIFT CONTROL SELECTOR ARM) - Callout Name: 7341
                                                                                                                                      E0BZ-7341-B

                                                                                                                                      INSULATOR (TRANSMISSION CONTROL BELLCRANK or SHIFT CONTROL SELECTOR ARM)

                                                                                                                                      #Green - used in 7A256 & in a 1/2'' hole

                                                                                                                                      View More

                                                                                                                                      #Green use in 7A256 & in a 1/2'' hole

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse KIT (THIRD SPEED GEAR) - Callout Name: 7B340
                                                                                                                                      E3ZZ-7B340-A

                                                                                                                                      KIT (THIRD SPEED GEAR)

                                                                                                                                      Use w/RAP-AB,AG,AH,AM,AP,AR trans. only- incl. (1) E3ZR 7113-AA & (1) E3ZR 7B340-DA gears - Not replaced, must be used in conjunction w/TSB #83-2-5 only

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse LEVER ASSY. (REVERSE GEARSHIFT) - Callout Name: 7K002
                                                                                                                                      D4FZ-7K002-A

                                                                                                                                      Lever - Reverse Gear Relay

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -68309-GS

                                                                                                                                      LEVER ASSY. (REVERSE GEARSHIFT)

                                                                                                                                      (AX-25) Retaining ring

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7K002-A

                                                                                                                                      LEVER ASSY. (REVERSE GEARSHIFT)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7K002-A

                                                                                                                                      LEVER ASSY. (REVERSE GEARSHIFT)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7K002-A

                                                                                                                                      LEVER ASSY. (REVERSE GEARSHIFT)

                                                                                                                                      #RF-E0ZR 7K002-AB

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse MAIN DRIVE GEAR BRG. TO CASE SNAP RING - Callout Name: 7026
                                                                                                                                      D1FZ-7026-A

                                                                                                                                      MAIN DRIVE GEAR BRG. TO CASE SNAP RING

                                                                                                                                      2-11/16'' I.D. x 3-1/16'' O.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING - Callout Name: 7064
                                                                                                                                      D1FZ-7064-H

                                                                                                                                      OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .067'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-J

                                                                                                                                      OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Blue - .070'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-K

                                                                                                                                      OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Black - .073'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-L

                                                                                                                                      OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Brown - .075'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7064-M

                                                                                                                                      OUTPUT SHAFT BEARING TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      #Copper - .078'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING - Callout Name: 7064
                                                                                                                                      E0ZZ-7064-A

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .080 thick #orange

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7064-B

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .082 thick #white

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7064-C

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .084 thick #green

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7064-D

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .087 thick #yellow - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7064-E

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .089 thick #blue - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7064-F

                                                                                                                                      OUTPUT SHAFT BRG. TO SHAFT-SELECTIVE FIT SNAP RING

                                                                                                                                      .092 thick #red - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PIN (REVERSE GEAR SELECTOR PIVOT) - Callout Name: 7K024
                                                                                                                                      -371197-S

                                                                                                                                      PIN (REVERSE GEAR SELECTOR PIVOT)

                                                                                                                                      (XX-16-FE) retaining ring - 7/16'' dia.

                                                                                                                                      View More

                                                                                                                                      (XX-16FE) Retaining ring - 7/16'' dia.

                                                                                                                                      Replaced by: F6ZZ-7348-A

                                                                                                                                      1 $3.08 $2.18
                                                                                                                                      D4ZZ-7K024-A

                                                                                                                                      PIN (REVERSE GEAR SELECTOR PIVOT)

                                                                                                                                      2'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PIN (REVERSE GEARSHIFT RELAY LEVER) - Callout Name: 7K024
                                                                                                                                      D1FZ-7K024-A

                                                                                                                                      Pin

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -115459-ES

                                                                                                                                      PIN (REVERSE GEARSHIFT RELAY LEVER)

                                                                                                                                      (AP-5) Cup (expansion plug) - 13/32'' dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PLATE (GEARSHIFT SELECTOR INTERLOCK) - Callout Name: 7K201
                                                                                                                                      -71919-GS

                                                                                                                                      PLATE (GEARSHIFT SELECTOR INTERLOCK)

                                                                                                                                      (AW-8) Pin (plate to case) - M8 x 24 (metric coarse)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7K201-A

                                                                                                                                      PLATE (GEARSHIFT SELECTOR INTERLOCK)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7K201-A

                                                                                                                                      PLATE (GEARSHIFT SELECTOR INTERLOCK)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7K201-A

                                                                                                                                      Sleeve

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PLUG (EXTENSION HOUSING) - Callout Name: 7K381
                                                                                                                                      D4ZZ-7K381-A

                                                                                                                                      PLUG (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7K381-A

                                                                                                                                      PLUG (EXTENSION HOUSING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PLUG (EXTENSION) - Callout Name: 7K381
                                                                                                                                      D1FZ-7K381-B

                                                                                                                                      Plug

                                                                                                                                      2-7/32'' dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse PLUNGER (MESHLOCK) - Callout Name: 7233
                                                                                                                                      E5RY-7233-B

                                                                                                                                      Pin - Locking

                                                                                                                                      1-13/32'' overall length x 3/16'' shank x 5/16'' dia. ball end

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7233-A

                                                                                                                                      PLUNGER (MESHLOCK)

                                                                                                                                      1-7/16'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0BZ-7233-A

                                                                                                                                      PLUNGER (MESHLOCK)

                                                                                                                                      Non-step plunger - 1-11/32'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7233-A

                                                                                                                                      PLUNGER (MESHLOCK)

                                                                                                                                      1 7/16'' long x 5/16'' large dia.-11/64 small dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse RETAINER (INPUT SHAFT BEARING) - Callout Name: 7050
                                                                                                                                      -387501-S

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      (BB-520-E) Bolt (retainer to case) - 5/16'' - 18 x 15/16''

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      D9BZ-7050-A

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      4-31/64'' long x 4-27/32'' flange O.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9ZZ-7050-B

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      #D9ZR 7050-BA-use w/RAD-Z, AA trans. only

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7050-A

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      Use w/RAP-AA,AF,AG,AH,AM,AR trans. 4 1/4'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7050-B

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      Use w/RAP-AB,AP trans. 4 13/16'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E602529-S72

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      (AB-53-A) screw & washer assy. (retainer to case) M6 x 1.00 x 20 hex. hd. (Metric)

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      -N602187-S100

                                                                                                                                      RETAINER (INPUT SHAFT BEARING)

                                                                                                                                      (AB-36-H) Bolt (retainer to case) hex hd. - M8 x 20 (metric coarse)

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      Collapse RETAINER (MAIN DRIVE GEAR BEARING) - Callout Name: 7050
                                                                                                                                      D8BZ-7050-B

                                                                                                                                      RETAINER (MAIN DRIVE GEAR BEARING)

                                                                                                                                      #78ET-7050-AA

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N602529-S2

                                                                                                                                      Screw

                                                                                                                                      (AB-53A)-screw & washer (retainer to case)-hex. head

                                                                                                                                      4 $0.46 $0.27
                                                                                                                                      Collapse RETAINER (OIL SEAL) - Callout Name: 7051
                                                                                                                                      D1FZ-7051-A

                                                                                                                                      RETAINER (OIL SEAL)

                                                                                                                                      3-13/32'' dia. - rubber

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse RING (SYNCHRONIZER BLOCKING) - Callout Name: 7107
                                                                                                                                      D4ZZ-7107-B

                                                                                                                                      Ring - 5th Speed Synchro. Blockg

                                                                                                                                      2 $29.20 $20.67
                                                                                                                                      D9BZ-7107-A

                                                                                                                                      Ring - 5th Speed Synchro. Blockg

                                                                                                                                      36 teeth - 3-1/4'' dia. - 13/32'' wide

                                                                                                                                      4 -- -- Discontinued
                                                                                                                                      E5RY-7107-A

                                                                                                                                      Ring - Synchronizer

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      D1FZ-7107-A

                                                                                                                                      RING (SYNCHRONIZER BLOCKING)

                                                                                                                                      3rd and 4th speed - 2-5/16'' dia. - 18 or 27 teeth

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      D4ZZ-7107-A

                                                                                                                                      RING (SYNCHRONIZER BLOCKING)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      E0ZZ-7107-A

                                                                                                                                      RING (SYNCHRONIZER BLOCKING)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7107-A

                                                                                                                                      RING (SYNCHRONIZER BLOCKING)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse ROLLER (COUNTERSHAFT PILOT BEARING) - Callout Name: 7121
                                                                                                                                      -378559-S

                                                                                                                                      Obsolescence - Policy

                                                                                                                                      (XX-242-C) Washer (retains roller in 7113 gear) - flat - 7/8''

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      -351529-S

                                                                                                                                      ROLLER (COUNTERSHAFT PILOT BEARING)

                                                                                                                                      (XX-240) Washer (retains roller in 7141 gear) - flat - 3/4''

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      C0DZ-7121-A

                                                                                                                                      ROLLER (COUNTERSHAFT PILOT BEARING)

                                                                                                                                      #C407-Q-use w/reverse idler gear (7141) (set consists of 44-repairs both ends)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C3AZ-7121-A

                                                                                                                                      ROLLER (COUNTERSHAFT PILOT BEARING)

                                                                                                                                      Set consists of 25 - repairs both ends

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      C4AZ-7121-A

                                                                                                                                      ROLLER (COUNTERSHAFT PILOT BEARING)

                                                                                                                                      Use w/countershaft gear (7113)-7/8'' long- 5/32'' dia. (set consists of 42 - repairs both ends)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL (EXTENSION HOUSING FLUID) - Callout Name: 7052
                                                                                                                                      E2DZ-7052-A

                                                                                                                                      Seal Assy - Oil

                                                                                                                                      1 $13.52 $9.57
                                                                                                                                      Collapse SEAL (EXTENSION HOUSING OIL) - Callout Name: 7052
                                                                                                                                      E0ZZ-7052-A

                                                                                                                                      SEAL (EXTENSION HOUSING OIL)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7052-A

                                                                                                                                      Seal Assy - Oil

                                                                                                                                      2-3/8'' bore dia. x 3/4 wide x 1-1/2'' I.D.

                                                                                                                                      Manufacturer's Note: Limited Availability
                                                                                                                                      1 $17.98 $12.73
                                                                                                                                      Collapse SEAL (GEARSHIFT RAIL) - Callout Name: 7288
                                                                                                                                      E3FZ-7288-A

                                                                                                                                      SEAL (GEARSHIFT RAIL)

                                                                                                                                      1'' O.D. x 1/8'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL (INPUT SHAFT OIL) - Callout Name: 7A283
                                                                                                                                      D8UZ-7A283-B

                                                                                                                                      Seal

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7A283-A

                                                                                                                                      SEAL (INPUT SHAFT OIL)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL (INPUT SHAFT OIL) - Refer to 7A283 - Callout Name: 7A011
                                                                                                                                      -7A011-

                                                                                                                                      SEAL (INPUT SHAFT OIL) - Refer to 7A283

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL (SHIFTER SHAFT OIL) - Callout Name: 7288
                                                                                                                                      E0ZZ-7288-A

                                                                                                                                      SEAL (SHIFTER SHAFT OIL)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL (SHIFTER SHAFT) - Callout Name: 7288
                                                                                                                                      E0ZZ-7288-B

                                                                                                                                      SEAL (SHIFTER SHAFT)

                                                                                                                                      1'' O.D. x 1/8'' thick, Before 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E2ZZ-7288-A

                                                                                                                                      SEAL (SHIFTER SHAFT)

                                                                                                                                      1'' O.D. x 13/64'' thick, From 6/15/82

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SEAL ASSY. (EXTENSION HOUSING OIL) - Callout Name: 7052
                                                                                                                                      D5ZZ-7052-A

                                                                                                                                      SEAL ASSY. (EXTENSION HOUSING OIL)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHAFT - Callout Name: 7017
                                                                                                                                      -7017-

                                                                                                                                      SHAFT

                                                                                                                                      REFER TO GROUP 7F207

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse SHAFT (GEARSHIFT) - Callout Name: 7358
                                                                                                                                      D8BZ-7358-A

                                                                                                                                      Shaft - Transmission Gear Shift

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9ZZ-7358-A

                                                                                                                                      SHAFT (GEARSHIFT)

                                                                                                                                      17-9/16'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7358-A

                                                                                                                                      SHAFT (GEARSHIFT)

                                                                                                                                      Incl. (1) E0ZZ-7C316-A pin, (1) E646510-S71 pin

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHAFT (INPUT) - Callout Name: 7017
                                                                                                                                      D4ZZ-7017-C

                                                                                                                                      Shaft - Input

                                                                                                                                      21 spline converter end, 22 spline clutch end

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1AZ-7017-A

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      9 3/4'' long-24 & 26 splines

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D8BZ-7017-B

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      #78ET-AA

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7017-B

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      25-36 teeth, 10 splines, 9-9/16'' long use w/RUG-EM trans.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7017-B

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      19-30 teeth, 10 spline-use w/RAP-AB,AH,AP trans.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7017-A

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      .6678/.6688 pilot dia. - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7017-B

                                                                                                                                      SHAFT (INPUT)

                                                                                                                                      19-30 teeth-23 spline-use w/RAP-AG,AM,AR trans.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHAFT (OUTPUT) - Callout Name: 7061
                                                                                                                                      -353351-S

                                                                                                                                      Ball

                                                                                                                                      (AA-9) ball (17285 to 7061) 1/4'' dia.

                                                                                                                                      View More

                                                                                                                                      (AA-9)-ball-1/4'' dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -305019-S

                                                                                                                                      SHAFT (OUTPUT)

                                                                                                                                      (NN-99E) pin 1/8'' x 3/8''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4FZ-7061-A

                                                                                                                                      SHAFT (OUTPUT)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D6ZZ-7061-A

                                                                                                                                      SHAFT (OUTPUT)

                                                                                                                                      Incl. D4ZZ 7107-B, first and second clutch hub and reverse sliding gear

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9BZ-7061-A

                                                                                                                                      SHAFT (OUTPUT)

                                                                                                                                      23-11/32'' long, 32-37-28 teeth

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7061-B

                                                                                                                                      SHAFT (OUTPUT)

                                                                                                                                      25-32-25-25 teeth-25 splines-incl. (7C115) 1st & 2nd hub & (7C382) rev. sliding gear

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHAFT (REVERSE IDLER GEAR) - Callout Name: 7140
                                                                                                                                      -E840125-S

                                                                                                                                      Pin

                                                                                                                                      (AN-5-C) pin (retain shaft in case) M3 x 24 (Metric)

                                                                                                                                      Replaced by: -W713286-S300

                                                                                                                                      1 $5.36 $3.16
                                                                                                                                      D1FZ-7140-A

                                                                                                                                      Shaft - Reverse Idler Gear

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -305080-S

                                                                                                                                      SHAFT (REVERSE IDLER GEAR)

                                                                                                                                      (NN-113) Pin (retain shaft in case) - 1/4'' x 1''

                                                                                                                                      View More

                                                                                                                                      (NN-113)-pin-spring-1/4'' x 1''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C4AZ-7140-A

                                                                                                                                      SHAFT (REVERSE IDLER GEAR)

                                                                                                                                      3/4'' dia. - 5-1/4'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7140-A

                                                                                                                                      SHAFT (REVERSE IDLER GEAR)

                                                                                                                                      4 17/32'' long x 11/16'' dia.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E1ZZ-7140-A

                                                                                                                                      SHAFT (REVERSE IDLER GEAR)

                                                                                                                                      Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHAFT and OFFSET LEVER ASSY. (GEARSHIFT) - Callout Name: 7358
                                                                                                                                      -67557-S

                                                                                                                                      SHAFT and OFFSET LEVER ASSY. (GEARSHIFT)

                                                                                                                                      (N-101-E) Pin (shaft to lever) 3/16'' x 3/4''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D9DZ-7358-C

                                                                                                                                      SHAFT and OFFSET LEVER ASSY. (GEARSHIFT)

                                                                                                                                      19-29/64'' long - incl. 7F018 lever

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SHIM KIT (INPUT SHAFT BEARING RETAINER) - Callout Name: 7051
                                                                                                                                      E0ZZ-7051-A

                                                                                                                                      SHIM KIT (INPUT SHAFT BEARING RETAINER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SLEEVE (GEAR SELECTOR INTERLOCK) - Callout Name: 7K201
                                                                                                                                      E0ZZ-7K201-A

                                                                                                                                      SLEEVE (GEAR SELECTOR INTERLOCK)

                                                                                                                                      Located between 1st. & 2nd. & 3rd. & 4th. fork - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7K201-B

                                                                                                                                      SLEEVE (GEAR SELECTOR INTERLOCK)

                                                                                                                                      5th speed - located between 1st & 2nd & 5th fork - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -E646510-S71

                                                                                                                                      SLEEVE (GEAR SELECTOR INTERLOCK)

                                                                                                                                      (AN-5-AA) Pin (sleeve to shaft) M3 x 12 (Metric)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      -N800844-S

                                                                                                                                      SLEEVE (GEAR SELECTOR INTERLOCK)

                                                                                                                                      (AB-209-L) Bolt (retain 7K201 to 7230 erd & rth fork) M10 x 1.5 x 52.5 (Metric)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N800845-S

                                                                                                                                      SLEEVE (GEAR SELECTOR INTERLOCK)

                                                                                                                                      (AB-205-F) Bolt (reqd. to locate 7K201 5th speed sleeve) M8 x 1.25 x 22.0 (Metric)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SNAP RING - Callout Name: 7026
                                                                                                                                      51A-7026-

                                                                                                                                      SNAP RING

                                                                                                                                      Output shaft bearing retaining - 3'' I.D. x 3-3/8'' O.D. x 1/16'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      8A-7026-

                                                                                                                                      SNAP RING

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C4AZ-7026-A

                                                                                                                                      SNAP RING

                                                                                                                                      Input shaft bearing retaining - 3-3/16'' I.D. x 3-1/2'' O.D. x 1/16'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7026-A

                                                                                                                                      SNAP RING

                                                                                                                                      Output shaft brg. cup to case - 2 7/8'' O.D. x 3/32'' thick- Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7026-B

                                                                                                                                      SNAP RING

                                                                                                                                      Countershaft - rear brg. cup to case - 2 9/16'' O.D. x 5/64'' thick - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SNAP RING - Callout Name: 7059
                                                                                                                                      D4FZ-7059-A

                                                                                                                                      SNAP RING

                                                                                                                                      3rd and 4th syn. retaining

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7059-A

                                                                                                                                      SNAP RING

                                                                                                                                      5th. speed syn. to shaft-1'' O.D. x 5/64'' thick speedometer gear (17285) to shaft

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7059-B

                                                                                                                                      SNAP RING

                                                                                                                                      5th speed gear (7144) to shaft

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SNAP RING - Callout Name: 7064
                                                                                                                                      8A-7064-

                                                                                                                                      SNAP RING

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      8A-7064-

                                                                                                                                      SNAP RING

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C4AZ-7064-A

                                                                                                                                      SNAP RING

                                                                                                                                      Input shaft bearing to shaft - 1-1/2'' I.D. x 2'' O.D. x 3/32'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C4AZ-7064-B

                                                                                                                                      SNAP RING

                                                                                                                                      First and second speed synchronizer to shaft - 1/11/16'' I.D. x 2'' O.D. x 3/32'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7064-A

                                                                                                                                      SNAP RING

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7064-B

                                                                                                                                      SNAP RING

                                                                                                                                      Third speed gear retaining

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SNAP RING (BEARING OUTER)- select fit - Callout Name: 7030
                                                                                                                                      D1FZ-7030-A

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      #Copper - 2-25/32'' O.D. x .067'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-B

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      2-25/32'' O.D. x .069'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-C

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      2-25/32'' O.D. x .070'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-D

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      2-25/32'' O.D. x .071'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-E

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      2-25/32'' O.D. x .072'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-F

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      #Blue - 2-25/32'' O.D. x .073'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-G

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      #Black - 2-25/32'' O.D. x .074'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7030-H

                                                                                                                                      SNAP RING (BEARING OUTER)- select fit

                                                                                                                                      2-25/32'' O.D. x .075'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPACER (COUNTERSHAFT GEAR) - Callout Name: 7149
                                                                                                                                      -119686-ES18

                                                                                                                                      Spacer - Washer

                                                                                                                                      (AX-15) Washer - flat M17.6 (Metric)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      D1FZ-7149-A

                                                                                                                                      SPACER (COUNTERSHAFT GEAR)

                                                                                                                                      15/16'' dia. x 23/32'' I.D. x 1/8'' thick

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse SPACER (COUNTERSHAFT) - Callout Name: 7125
                                                                                                                                      D2RY-7125-A

                                                                                                                                      SPACER (COUNTERSHAFT)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPACER (MAIN SHAFT FIRST GEAR THRUST) - Callout Name: 7071
                                                                                                                                      D4ZZ-7071-A

                                                                                                                                      SPACER (MAIN SHAFT FIRST GEAR THRUST)

                                                                                                                                      1-3/8'' I.D. x 1-3/4'' O.D.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPACER (TUBE) - Callout Name: 7115
                                                                                                                                      D1FZ-7115-A

                                                                                                                                      SPACER (TUBE)

                                                                                                                                      11/16'' dia. x 4 7/8'' long

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART - Callout Name: 17285
                                                                                                                                      C8OZ-17285-B

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 8, I.D.: 1 3/8, O.D.: 2 1/64, LENGTH: 11/16, MATERIAL: NYLON, COLOR: BROWN

                                                                                                                                      Replaced by: F7TZ-17285-AA

                                                                                                                                      -AR- $10.10 $7.15
                                                                                                                                      DOTZ-17285-A

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 6, I.D.: 1 3/4., O.D.: 2.00, LENGTH: 11/16, MATERIAL: NYLON, COLOR: GREEN

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E3FZ-17285-B

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 29, I.D.: 2 1/2, O.D.: 3 1/2, LENGTH: 1/2, MATERIAL: NYLON, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E3ZZ-17285-A

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 7, I.D.: 1 3/32, O.D.: 2.00, LENGTH: 11/16, MATERIAL: NYLON, COLOR: YELLOW

                                                                                                                                      -AR- $22.33 $15.81
                                                                                                                                      E3ZZ-17285-B

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 6, I.D.: 1 3/32, O.D.: 2.00, LENGTH: 11/16, MATERIAL: NYLON, COLOR: BLACK

                                                                                                                                      -AR- $15.88 $11.25
                                                                                                                                      E5RY-17285-A

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 7, MATERIAL: STEEL, COLOR: YELLOW

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E6DZ-17285-A

                                                                                                                                      Gear - Speedometer

                                                                                                                                      TEETH: 7, I.D.: 17/32, O.D.: 1 31/32, LENGTH: 17/32, MATERIAL: NYLON, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E7RY-17285-A

                                                                                                                                      Gear - Speedometer

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      C3OZ-17285-C

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 7, I.D.: 1 3/8, O.D.: 2 1/4, LENGTH: 11/16, MATERIAL: STEEL, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      C4DZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 7, I.D.: 1 3/8, O.D.: 1 13/16, LENGTH:11/16, MATERIAL: NYLON, COLOR: BLACK

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D1FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 6, I.D.: 1.00, O.D.: 1 29/32, LENGTH: 35/64, MATERIAL: STEEL, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D1RY-17285-C

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH 7, I.D.: 1 1/32, O.D.: 1 25/32, LENGTH: 7/16, MATERIAL: STEEL, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D7FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 8, I.D.: 1.00, O.D.: 1 29/32, LENGTH: 35/64, MATERIAL: STEEL, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D8FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 7, I.D.: 1.00, O.D.: 1 29/32, LENGTH: 35/64, MATERIAL: STEEL, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D8RY-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 21, I.D.: 1 57/64, O.D.: 3.00, LENGTH: 1/2, MATERIAL: NYLON, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      D8TZ-17285-B

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 9, I.D.: 1 19/32, O.D.: 2 1/64, LENGTH: 1 9/64, MATERIAL: NYLON, COLOR: ORANGE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E1FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 29, I.D.: 2 7/8, O.D.: 3 1/2, LENGTH: 1/2, MATERIAL: NYLON, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E1FZ-17285-B

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 29, I.D.: 2 1/2, O.D.: 3 1/2, LENGTH: 1/2, MATERIAL: NYLON, COLOR: NONE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E1ZZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 7, I.D.: 7/64, O.D.: 1 7/8, LENGTH: 11/16, MATERIAL: NYLON, COLOR: RED

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E3FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 28, I.D.: 2.00, O.D.: 3 1/2, LENGTH: 1/2, MATERIAL: NYLON, COLOR: GREEN

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E5FZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 26, I.D.: 2 13/16, O.D.: 3 1/2, LENGTH: 1/2, MATERIAL: NYLON, COLOR: LT. BLUE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      E8BZ-17285-A

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 23, MATERIAL: NYLON, COLOR: WHITE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      EOZZ-17285-B

                                                                                                                                      SPEEDOMETER DRIVE GEAR IDENTIFICATION CHART

                                                                                                                                      TEETH: 6, I.D.: 7/64, O.D.: 1 7/8, LENGTH: 11/16, MATERIAL: NYLON, COLOR: PURPLE

                                                                                                                                      -AR- -- -- Discontinued
                                                                                                                                      Collapse SPRING (GEAR SHIFT LEVER) - Callout Name: 7K205
                                                                                                                                      D1FZ-7K205-A

                                                                                                                                      Spring

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7K205-A

                                                                                                                                      SPRING (GEAR SHIFT LEVER)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPRING (MESHLOCK) - Callout Name: 7234
                                                                                                                                      D2FZ-7234-A

                                                                                                                                      Spring

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -230001-ES

                                                                                                                                      SPRING (MESHLOCK)

                                                                                                                                      (AU-1) Set screw - headless M12 x 14 (metric coarse)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPRING (SHIFTER INTERLOCK) - Callout Name: 7234
                                                                                                                                      -378206-S

                                                                                                                                      Obsolescence - Policy

                                                                                                                                      (BB-539-L) Bolt (spring pressure) hex. hd. 3/8'' - 16 x 3/8''

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      C7AZ-7234-A

                                                                                                                                      SPRING (SHIFTER INTERLOCK)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D4ZZ-7234-A

                                                                                                                                      SPRING (SHIFTER INTERLOCK)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -N800090-S51

                                                                                                                                      SPRING (SHIFTER INTERLOCK)

                                                                                                                                      (AB-148G) Screw (spring to cover) M12 x 10 (metric coarse)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SPRING (SYNCHRONIZER BLOCKING) - Callout Name: 7109
                                                                                                                                      D1FZ-7109-A

                                                                                                                                      Spring - Synchronizer

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      D4ZZ-7109-A

                                                                                                                                      Spring - Synchronizer

                                                                                                                                      2 $3.44 $2.43
                                                                                                                                      D1FZ-7109-B

                                                                                                                                      SPRING (SYNCHRONIZER BLOCKING)

                                                                                                                                      3rd and 4th speed - 2-1/8'' dia.

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      D4ZZ-7109-B

                                                                                                                                      SPRING (SYNCHRONIZER BLOCKING)

                                                                                                                                      1st and 2nd speed - 2-19/32'' O.D.

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      E0ZZ-7109-A

                                                                                                                                      SPRING (SYNCHRONIZER BLOCKING)

                                                                                                                                      1st & 2nd speed 3rd & 4th speed 5th speed

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      E4TZ-7109-A

                                                                                                                                      SPRING (SYNCHRONIZER BLOCKING)

                                                                                                                                      1st & 2nd speed 3rd & 4th speed

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse SPRING CLIP (SHIFT LEVER STOP) - Callout Name: 7E444
                                                                                                                                      D1FZ-7E444-A

                                                                                                                                      SPRING CLIP (SHIFT LEVER STOP)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse SYNCHRONIZER ASSY. - Callout Name: 7124
                                                                                                                                      -7024-

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      1st & 2nd speed _ Service in 7061 assy.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      -7124-

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      1st and 2nd speed - Service in 7061 assy.

                                                                                                                                      View More

                                                                                                                                      First and second speed - service in 7061 assy.

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D1FZ-7124-A

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      3rd and 4th speed - 7107 not included

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      D5ZZ-7124-A

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      Third and fourth speed

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7124-B

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      3rd & 4th & 5th speed-note when using- for 3rd & 4th speed syn. (1) additional-E0ZZ 7107-A blocking ring is required

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E4TZ-7124-B

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      1st & 2nd speed

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E4TZ-7124-D

                                                                                                                                      SYNCHRONIZER ASSY.

                                                                                                                                      3rd & 4th speed

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse WASHER (1ST GEAR THRUST) - Callout Name: 7071
                                                                                                                                      E0ZZ-7071-A

                                                                                                                                      WASHER (1ST GEAR THRUST)

                                                                                                                                      1 25/64'' I.D. x 9/64'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse WASHER (CONSTANT MESH LOW GEAR) - Callout Name: 7071
                                                                                                                                      C3AZ-7071-D

                                                                                                                                      WASHER (CONSTANT MESH LOW GEAR)

                                                                                                                                      Thrust - 1-11/16'' I.D. x 2'' O.D. x 3/32'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse WASHER (COUNTERSHAFT CLUSTER GEAR) - Callout Name: 7119
                                                                                                                                      D2RY-7119-A

                                                                                                                                      WASHER (COUNTERSHAFT CLUSTER GEAR)

                                                                                                                                      Front and rear

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse WASHER (COUNTERSHAFT GEAR THRUST) - Callout Name: 7119
                                                                                                                                      C3AZ-7119-A

                                                                                                                                      WASHER (COUNTERSHAFT GEAR THRUST)

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      C4AZ-7119-A

                                                                                                                                      WASHER (COUNTERSHAFT GEAR THRUST)

                                                                                                                                      Front and rear - 1-3/4'' dia. - 1/16'' thick

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse WASHER (OUTPUT SHAFT 1st GEAR THRUST) - Callout Name: 7071
                                                                                                                                      D2RY-7071-A

                                                                                                                                      Spacer - Washer

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse WASHER (OUTPUT SHAFT THRUST) - Callout Name: 7A385
                                                                                                                                      C4AZ-7A385-A

                                                                                                                                      WASHER (OUTPUT SHAFT THRUST)

                                                                                                                                      1-3/8'' I.D. x 2-5/16'' O.D. x 3/16'' thick

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      Collapse WASHER (REVERSE IDLER GEAR THRUST) - Callout Name: 7149
                                                                                                                                      D7DZ-7149-A

                                                                                                                                      WASHER (REVERSE IDLER GEAR THRUST)

                                                                                                                                      Front and rear

                                                                                                                                      2 -- -- Discontinued
                                                                                                                                      Collapse WASHER (SECOND GEAR) - Callout Name: 7119
                                                                                                                                      D4ZZ-7119-A

                                                                                                                                      WASHER (SECOND GEAR)

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      E0ZZ-7119-A

                                                                                                                                      WASHER (SECOND GEAR)

                                                                                                                                      1 27/32'' O.D. x 3/32'' thick - Not repl. 6/87

                                                                                                                                      1 -- -- Discontinued
                                                                                                                                      The following part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging Ford will sometimes include multiples parts in a package. To view how many parts are included in your selected part, click on the "add to cart" button then the package quantity will be displayed in the shopping cart.
                                                                                                                                      Part No.:

                                                                                                                                      Although Ford Motor Company no longer manufactures this part, we may still have stock or the ability to special order it.


                                                                                                                                      To verify availability, please contact us. We will respond promptly.

                                                                                                                                      Genuine Ford Parts, the Right Choice
                                                                                                                                      FordPartsGiant.com offers the lowest prices for genuine 1982 Ford Mustang parts. Parts like INTERNAL PARTS 4 speed manual trans. - German design are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty.