Make sure this part fits your vehicle

Ford 7L1Z-18125-CP Kit - Shock Absorber

2007 Ford 7L1Z18125CP

Ford 7L1Z-18125-CP Kit - Shock Absorber
  • Part Description
    Kit - Shock Absorber
  • Base No.
    18125
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.18125
    Manufacturer Part Number7L1Z-18125-CP, 7L1Z18125CP
    Part DescriptionKit - Shock Absorber
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU7L1Z-18125-CP
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007 Ford Expedition8 Cyl 5.4L4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
    2007 Lincoln Navigator8 Cyl 5.4L4-Speed Automatic Transmission E4OD(4R100), 6-Speed Automatic Transmission (6R80), 6-Speed Automatic Transmission ZF 6HP26 Steptronic, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Customer Questions & Answers

Q:
Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
A:
You can Select Your Vehicle to check if 7L1Z-18125-CP fits your vehicle.
Posted by FordPartsGiant Specialist
Q:
What steps should be taken to remove the shock absorber from below the 1999 Ford Expedition? Posted by Customer
A:
Working from underneath the vehicle, remove the two nuts (2WD models) or bolt and nut (4WD models) that attach the lower end of the shock absorber to the lower control arm, and then pull the shock out from below.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
Is there any emphasis on simulating ride height before final tightening for the 2008 Ford Expedition? Posted by Customer
A:
Yes, the importance of simulating ride height before final tightening is emphasized.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How should you support the rear axle for the 2000 Ford Expedition? Posted by Customer
A:
Use a floor jack placed under the differential.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What should you visually inspect when checking the steering and suspension components for the 2002 Ford Expedition? Posted by Customer
A:
Visually inspect for damage and distortion, including seals, boots, bushings, and any leaks.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What should you do after removing the shock absorber for the 2001 Lincoln Navigator? Posted by Customer
A:
Install the shock absorber in the reverse order of removal.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
How are trailing arms removed on the 2007 Lincoln Navigator? Posted by Customer
A:
Remove the nuts and bolts securing the arms to the knuckle and frame, then install new bolts and nuts loosely.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What are the potential consequences of worn or damaged suspension and steering linkage components for the 2004 Lincoln Navigator? Posted by Customer
A:
The potential consequences include excessive and abnormal tire wear, poor ride quality and vehicle handling, and reduced fuel economy.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
Q:
What steps are involved in removing the front wheels and the upper shock mounting nut for the 1998 Lincoln Navigator? Posted by Customer
A:
You should first loosen the front wheel lug nuts, then raise the front of the vehicle and support it securely on jackstands. After applying the parking brake, remove the wheels. To remove the upper shock mounting nut, use an open-end wrench to hold the shock from turning while removing the nut.
Posted by FordPartsGiant Specialist
See expert answers on similar Shock Absorber
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 7L1Z-18125-CP, the Right Choice

Your vehicle deserves only genuine OEM Ford parts and accessories. To ensure reliability, purchase Ford part # 7L1Z-18125-CP Kit - Shock Absorber with base parts number 18125. It is sometimes referred to as Ford Shock Absorber. Our Ford parts and accessories are expedited directly from authorized Ford dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Ford parts are the best for restoring your vehicle to factory condition performance. This part fits specific Ford Expedition models. It fits Lincoln Navigator.

Affordable, reliable and built to last, Ford part # 7L1Z18125CP Kit - Shock Absorber stands out as the smart option. FordPartsGiant.com is your prime online source with the biggest and best selection of genuine Ford parts and accessories at giant discounted prices. We have the OEM Ford parts and accessories you need at the wholesale prices. FordPartsGiant.com has you covered no matter what type of Ford vehicle you drive. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly